Chúng tôi chuyên cung cấp các thiết bị công nghiệp.

Công ty TNHH TM VÀ DV TĂNG MINH PHÁT là đại lý phân phối của hãng AT2E tại Việt Nam Qúy khách có nhu cầu hỗ trợ tư vấn xin liên hệ:

Mr Nghĩa:

phone: 0914537669 or 0989077459

email: [email protected]

Chúng tôi xin giới thiệu các thiết bị khác của hãng AT2E công ty đang cung cấp:

- Máy đo đọ dày chai pet AMTG-1 , AMTG-2 AT2E – AT2E Vietnam – TMP Vietnam

- Máy đo lực vặn nắp chai TMV5 AT2E – AT2E Vietnam – TMP Vietnam

- Máy cắt chai pet HWBC-1, HWBC-2 AT2E – AT2E Vietnam – TMP Vietnam

Plastic Bottle Burst Tester | PBBT-1

PBBT-1 PET Bottle Burst Tester is a specialized test equipment for testing the PET bottles. It’s designed in accordance with the three international test methods which are commonly used. Users can choose the test method basing on their requirement. The PBBT-1 is capable to test the capacity of resilience under certain pressure or the rupture test of the PET bottle.

Through the reproduction of the pressurization, the process has been linearized and it increases to the predetermined point or the point of bursting.

After selecting the test program, the cycle will start automatically depending on the settings. The touch screen displays the pressure value in real time and record the maximum pressure and burst pressure.

Characteristics:
Standard equipment forthePET bottleindustry.
3internationaltest methods are available
PLCintegrated & Touch screen control
Automaticclamping and filling system
Can store 10 operators and 30 products
User defines the product lot number and sequence number
Displaycurvesof pressure andvolume expansionduring the test
Monitors and recordsthe temperature of thewaterduring the test
Applicableto 2.5 L bottle(consult us forbigger size)
Stainless steel design ensures the durability of tester
RS232Cdata output: connected to either printer or software
Integrated calibration function

Modes details:

Fill ramp mode:

The filling ramp mode is designed to simulate the situation of filling lines of PET bottles. Under this mode, the PET bottles are pressurized rapidly to the initially preset pressure and maintained for a given time (for example 13 seconds). Then continue to increase the pressure with a speed of 0.1 bar/s until the outbreak of the bottle or reaching the max pressure or volume. Preset parameter includes: initial screening pressure, maximum pressure, and expansion of volume limit.

Burst mode:

Under this mode, PET bottle will be pressurized rapidly to the initially preset pressure and maintained for a predefined period.

Custom mode:

Under this mode, user is able to create the pressure curve to meet the particular conditions of control. Users can define the pressure curve by steps, after the adjustment is made, the corresponding curve will be displayed on the user interface.

Specifications
Measuring range: 0 – 20 bar
Resolution: 0.1 bar
Sample range: Up to 2.5 L bottle
Expansion in volume: Up to 2 L
Power supply: 115/230V, 50 – 60Hz
Pressure required: 3 bar water / 20 bar air source
Temperature range: 0 to 50 °C
Rear Panel: RS232 serial output
Dimensions: 740 (L) × 500 (W) × 920 (H) mm
Net weight: 70 kg