ACO-8/8as Automated Cleveland Open Cup Flash Point Tester

Single Action Setting: The flash detector rings and the temperature sensor are permanently mounted on a swing-arm assembly, which allows easy setting of the specimen.

Easy Operation: Select a test mode and enter the expected flash point; while the instrument executes the test, you are free to do other lab work. The tester follows the exact procedures prescribed in the test method, and the completion of the test cycle is signaled by beeps. The test result is brightly shown on the VFD module.

Auto Fire Point Detection: In addition to the flash point, fire point can be determined automatically. The fire point is detected when the double ionization rings detect 5 sec of continuous burning.

Auto Fire Containment: ACO-7 is equipped with a fire containment lid which activates automatically to help extinguish the fire when ACO-7 detects a fire point or specimen is burning heavily.

Modular Design: The tester consists of a computer control unit and a test head unit, allowing remote placing of the test head unit up to 3 meters away. An optional Changeover unit can be purchased to attach the control unit to another type of flash point test head unit (APM-8 or ATG-8). The control unit is designed to control any of the three different flash point test head units, one at a time.

Specifications

Conforming Standards:
ISO 2592, ASTM D92, IP 36, etc.

Measuring Standards:
Ambient to 400 ^oC

Test Mode:
ASTM D92 Flash + Fire, Special (Fast Search),
User’s Custom

Display:
Fluorescent display tube (VFD Module)

Temperature Sensor:
PT-100 in stainless steel sheath

Flash Detector:
Ionization Ring

Heater:
Nichrome Coil heater: 800W@100V or 800W@220V

Ignition Source:
Gas ignition with automatic lighting

Skimming Mechanism (Asphalt Version Only):
Paddle rotates to skim the surface of the specimen. Skimming start temp and interval are programmable. When not in use, the paddle can be removed.

Cooling Device:
Forced air cooling by sirocco fan

Barometric Correction:
By entering the barometric pressure reading through the control panel, or by an optional barometric pressure sensor

Data Output:
RS-232C 1 channel (for PC or Optional Printer)

Safety Mechanism:
Fire containment lid which activates automatically to help extinguish the fire when the ACO-7 detects a fire point

Automatically shuts off and the problem is reported by buzzer and display, in case:

1	EFP+30oC or at 400oC is reached
2	Temperature sensor is found defective
3	Flash detector is found defective
4	Thermofuse is blown (Also fire containment lid activates)
5	Built-in battery is found drained
6	Arm is not set in place
7	Control computer crashes (no display)

Dimensions & Weight:
Control unit: 230W x 455D x 110H (mm), 6.0kg
Test unit: 230W x 450D x 275H (mm), 14.0kg
Test unit: 230W x 450D x 345H (mm), 14.5kg (Asphalt Version)

Installation Site:
Ambient temperature: 0 to 40^oC
RH: Less than 90%(no condensation)

Utility:
AC100/120V or 220/240V 50/60Hz (set at the factory) 1.0kW(max.)
GAS SUPPLY
LP gas or natural gas (Max. pressure<9.8kPa)

Thông tin chi tiết, xin liên hệ hệ:

Lâm Thị Thúy An

Tel: 0918 844 870

Email: [email protected]

-------------------------

Hoa Y Co., Ltd
406/63 Cong Hoa Str., Ward 13, Tan Binh Dist., HCM City
Tel: 0918 844 870

Fax: ( 848) 3812 3085

Email : [email protected]