Bộ điều khiển lực căng Nireco TC920V – Nireco Viet Nam
ID: G-0010505-00271
Công ty TNHH Thương Mại Và Dịch Vụ Tăng Minh Phát (TMP Vietnam) là nhà phân phối của hãng Nireco tại thị trường Việt Nam, chuyên về các thiết bị như ,…
Hãy liên hệ với chúng tôi để được hỗ trợ tốt nhất !
Trần Công Lên
Tel: 0906.765.489 – 0914.573.068
Email: [email protected]
[email protected]
Tension Controller TC920V
Specifications Power supply voltagePower consumptionCurrent capacityMassEnvironmentOperating ambient temperatureOperating ambient humidityVibration resistancePower source noiseOperating ambient atmosphereRated tensionTension sensors that can be connected to the TC920VOutputOutput for measurementExternal setting power supplyPower supply for external settingContact outputZero tension output
Minimum diameter output
Automatic control outputInputSensor inputAnalog inputContact inputPulse generator Gate generatorDetection for speed and diameter
100 to 240V AC 50/60Hz | |
300VA (Entry cuurent 60Atyp (20ms)) | |
1.5A (200V) | |
6kg | |
0 to +50°C | |
35 to 85%RH (no condensation) | |
3.5mm, 1G, 3 to 150Hz, 3 directions (for one hour) | |
2kV, normal mode, pulse width of common mode 50 nS, 1 uS (depends on the noise simulator) |
|
Place free from water droplets, inflammable gas, corrosive gas, corrosive gas, and dust | |
10~10000N | |
MB, MG, MC, CD, MJ, CJ, TSA, and intrinsically safe TSA tension sensors. | |
Tension value voltage output (0 to 10VFS (1 mA or less)) Current output for tension value meter (0 to 1mA/FS) |
|
0 to 10V (1 mA or less), 4 to 20mA (470Ω or less) 0 to 24V (4A or less) |
|
Power supply for external setting | |
Number of outputs, 3 (DC30V 0.2A, AC200V 0.2A) |
|
•MG tension sensor •MB tension sensor •MC tension sensor •CD tension sensor •MJ tension sensor •CJ tension sensor •TSA tension sensor |
|
•External tension setting •External manual tension setting |
A number of inputs, 2 (0 to 5V, input impedance 100kΩ) |
•Analog diameter (for Taper and Start level) •New spindle deameter (for splicer) •External start level setting •External taper rate |
A number of inputs, 4 (0 to 10V, input impedance 100kΩ) |
•Automatic •Memory reset •Accelerate/decelerate •Splice •Output on •Emergency stop, external automatic / manual or accelerate •Diameter calculation reset •Diameter calculation hold |
A number of inputs, 8 (12V DC, 12mA) |
12V DC |
Liên hệ mua sản phẩm
(Trong khuôn viên Tổng Công Ty Thái Sơn - Bộ Quốc Phòng)
Điện thoại: 028 6658 9888
Email: [email protected]