Bơm Torishima Japan
Công ty TNHH Thương Mại Kỹ Thuật Hưng Gia Phát là nhà phân phối sản phẩm chính hãng Bơm Torishima tại Việt Nam.
Mr Dũng : 0938 710079
Email: [email protected]
[Website] : http://www.hgpvietnam.com
Chúng tôi luôn tự hào là một trong những nhà cung cấp Bơm Torishima hàng đầu , chuyên dùng cho ngành công nghiệp trong các dây chuyền sản xuất và trong các hệ thống điều khiển hoạt động của nhà máy, xí nghiệp hay các sản phẩm công nghệ cao.
Chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như: Bơm Torishima , Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump…
The TORISHIMA CDM is a horizontal axially split double-suction pump used in a wide range of applications
such as seawater desalination plants, power plants, water and waste water, water transmission and irrigation etc.
Double suction and three-dimensional impeller gives low NPSH requirements and high efficiency. Upper half casing
can be simply disassembled without disturbing pipework. This enables easy maintenance and routine inspection.
Technical Data
Total Head |
3 to 400m / 10 to 1,300ft |
Capacity |
9 to 36,000m³/h / 40 to 158,500USgpm |
Temperature |
up to 80°C / 176°F |
Size |
200 to 2,000mm |
The TORISHIMA MHG is a horizontal multistage ring section pump specifically designed for high pressure services
such as power stations, incineration plants and HRSG in steel and nonferrous mill.
The simplified construction allows easy maintenance and quick overhaul, and no warming through is required for MHG.
Mechanical seals are equipped as standard and, blind stage and interstage tapping can be fitted as option for customized requirement.
The optimum pump design ensures total reliability and highly cost-effective solutions.
Technical Data
Total Head |
up to 4,200m / 13,800ft |
Capacity |
up to 1,400m³/h / 6,100USgpm |
Temperature |
up to 200°C / 392°F |
Pressure |
up to 42MPa / 6,090psi |
Size |
50 to 125mm |
The Torishima MMTV is a vertical mixed-flow multistage pump with canister, mainly applied as a condensate pump in power plants.
The high pressure vertical canister pump presents significant advantage inthose cases where limited suction head is available. This applies particularly in the case of condensers in power stations, desalination plants and other pipeline pumping applications. The canister serves as a suction receiver, and
by adding the length to the canister / pump, advantage suction head can be provided to ensure trouble-free operation.
Technical Data
Total Head |
up to 490m / up to 1,568ft |
Pressure |
up to 3.9MPa / up to 565psi |
Capacity |
up to 2,900m³/h / up to 12,760USgpm |
Temperature |
up to 200°C / 392°F |
Size |
40 to 400mm |
The TORISHIMA SPV is a vertical, mixed-flow pump suitable for a wide range of application,
such as seawater intake pumps for desalination, cooling water pumps for power stations, and drainage pumps, etc.
Canister can be offered as pump type SPTV for dry-pit applications such as brine recirculation pumps in MSF desalination plants. Suitable material combination is selected based on the application.
For seawater pumps, for example, corrosion resistant material such as duplex, super-duplex is available with sufficient experience on site.
Technical Data
Total Head |
3 to 100m / 10 to 330ft |
Capacity |
600 to 81,600m³/h / 2,600 to 360,000USgpm |
Temperature |
up to 80°C / 176°F |
Size |
300 to 3,000mm |
The TORISHIMA MMK and MML are horizontal, radially split ring section pumps, single flow.
The casings are sealed by flat gasket and held together by the bolts. The stage casing and the tie bolts are encased in a steel cladding.
The pump feet are arranged either below the pump or at centre line accordig to the enumber of stages and the temperature.
Technical Data
Total Head |
up to 500m / 1,640ft |
Capacity |
up to 1,800m³/h / 7,930USgpm |
Temperature |
up to 250°C / 482°F |
Suction pressure |
up to 2.9MPa / 426psi |
Discharge pressure |
up to 5.3MPa / 767psi |
Speed |
up to 3,600min-1 |
The Torishima CPC is an end-suction volute pump as per ISO 2858-1975, specially applied for chemical and petrochemical industries, and widely used as process pumps in general chemical industries.
The high efficient design provides high performance at a low running cost. There is a wide range of structural design to meet many different requirements for specification.
Technical Data
Total Head |
up to 150m / 480ft |
Capacity |
up to 1,500m³/h / 6,600USgpm |
Pressure |
2.45MPa/ 355psi |
Temperature |
up to 200°C / 392°F |
Size |
32 to 250mm |
The Torishima CPW is an end-suction volute pump,
mainly used as feed pumps or circulating pumps in high pressure hot water generating plants
Technical Data
Total Head |
up to 200m / 672ft |
Capacity |
up to 1,440m³/h / 6,336USgpm |
Pressure |
6.3MPa/ 913psi |
Temperature |
up to 280°C / 536°F |
Size |
40 to 250mm |
Model Pumps Torishima thông dụng :
|
Để biết thêm chi tiết thông tin và tư vấn miễn phí với giá cả tốt nhất.gọi cho chúng tôi.
Nguyễn Minh Dũng
[ Senior Sales Eng ]
[Cellphone] +84 938 710079
[Email] [email protected]
Online contact :
Skype: minhdung.hgp
Bơm Torishima-hgpvietnam
Hộp giảm tốc Rossi-hgpvietnam
Động Cơ Mặt Bích Rossi-hgpvietnam
Động cơ giảm tốc bánh răng hành tinh Rossi
AC Servo Yaskawa Junma-hgpvietnam
AC Servo Yaskawa
Công tắc hành trình Schmersal VietNam
Đại lý phân phối Sew Eurodrive tại Việt nam
Bóng đèn UV Sankyo Denki G4T5
Bóng đèn UV
Cảm biến hình ảnh Banner
cảm biến siêu âm Banner T30UX
Cảm ơn Quý khách đã quan tâm đến sản phẩm trên.
Hiện tại tài khoản doanh nghiệp đăng sản phẩm trên chưa được xác thực.
Để mua sản phẩm, Quý khách vui lòng liên hệ chi tiết theo địa chỉ: tp hcm, hoặc Email: [email protected]
Trân trọng.
(Trong khuôn viên Tổng Công Ty Thái Sơn - Bộ Quốc Phòng)
Điện thoại: 02862.761612 - 02862.757416 - 090 315 0099
Email: [email protected]