Cảm biến lực căng Nireco MB11/33 – Nireco Viet Nam liên hệ
Cảm biến lực căng Nireco MB11/33 – Nireco Viet Nam
ID: G-0010505-00264
Công ty TNHH Thương Mại Và Dịch Vụ Tăng Minh Phát (TMP Vietnam) là nhà phân phối của hãng Nireco tại thị trường Việt Nam, chuyên về các thiết bị như cảm biến lực căng, cảm biến chỉnh biên, máy dò sản phẩm lỗi trên băng chuyền,…
Hãy liên hệ với chúng tôi để được hỗ trợ tốt nhất !
Trần Công Lên
Tel: 0906.765.489 – 0914.573.068
Email: [email protected]
[email protected]
TSA Tension Sensor 
Specifications Standard Model ModelTSA200
(MB11)TSA1000
(MB25)TSA010K
(MB33, MB41)*1Rated tension (N)*1Permissible roller load (N)*1
*2Permissible overload
(10-times rated load) (N) Roller displacement (μm/N) Spring constant (N/mm)*3Resonant frequency (Hz) Output voltage under a single load-rated loading (mV)*4Response time (msec) Mass (kg) Tension direction Mounting angle Power supply voltage Operating temperature and humidity Operating principle IP protection rating
| 200 | 1000 | 10000 | ||
| 200 | 1000 | 7000 | ||
| 2000 | 10000 | 100000 | ||
| 0.3 | 0.05 | 0.005 | ||
| 3333 | 20000 | 200000 | ||
| 91.0 | 99.6 | 108.1 | ||
| ±420±63mV/100N | ±370±55mV/500N | ±535±80mV/5000N | ||
| 0.5 or less | ||||
| 1.4 | 3.6 | 16 | ||
| Forward and reverse direction | Forward only (reverse impossible) | |||
| Full 360° | ||||
| ±15VDC （+15V/50mA，-15V/10mA） | ||||
| 0 to 50°C, 35 to 85% R.H., no condensation | ||||
| Strain gauge detection | ||||
| IP30 | ||||
| Note *1. Values for rated tension, permissible roll weight and allowable overload are those applicable in double-sided detection. The figures for single-sided detection are 1/2 of these values. *2. The allowable overload indicates the permitted force applied in the direction of the resultant tension. *3. The resonant frequency listed is that during double-sided detection when tension is at its maximum and when the roll weight is at its maximum. *4. The response time is that value measured when the tension change is 1/10th of the rated tension. |
||||
Intrinsically Safe Construction Model ModelTSA200S
(MB11S)TSA1000S
(MB25S)TSA010KS
(MB33S, MB41S)*1Rated tension (N)*1Permissible roller load (N)*1
*2Permissible overload
(10-times rated load) (N) Roller displacement (μm/N) Spring constant (N/mm)*3Resonant frequency (Hz) Output voltage under a single load-rated loading (mV)*4Response time (msec) Mass (kg) Tension direction Mounting angle*5Power supply voltage Operating temperature and humidity Operating principle*6IP protection rating
| 200 | 1000 | 10000 | ||
| 200 | 1000 | 7000 | ||
| 2000 | 10000 | 100000 | ||
| 0.3 | 0.05 | 0.005 | ||
| 3333 | 20000 | 200000 | ||
| 91.0 | 99.6 | 108.1 | ||
| ±350±52.5mV/100N | ±315±47mV/500N | ±460±68mV/5000N | ||
| 0.5 or less | ||||
| 1.4 | 3.6 | 16 | ||
| Forward and reverse direction | Forward only (reverse impossible) | |||
| Full 360° | ||||
| ±6VDC/20mA | ||||
| 0 to 50°C, 35 to 85% R.H., no condensation | ||||
| Strain gauge detection | ||||
| IP30 | ||||
| Note * 1. Values for rated tension, permissible roll weight and allowable overload are those applicable in double-sided detection. The figures for single-sided detection are 1/2 of these values. * 2. The allowable overload indicates the permitted force applied in the direction of the resultant tension. * 3. The resonant frequency listed is that during double-sided detection when tension is at its maximum and when the roll weight is at its maximum. * 4. The response time is that value measured when the tension change is 1/10th of the rated tension. * 5. The power supply voltage indicates the voltage input to the safety barrier. * 6. Caution indicated by an "X" mark: Do not allow the tension sensor to be subjected to impacts or friction as there is the risk that it may ignite. |
||||
Liên hệ mua sản phẩm
(Trong khuôn viên Tổng Công Ty Thái Sơn - Bộ Quốc Phòng)
Điện thoại: 028 6658 9888
Email: [email protected]
