INSTALLATION:
May be installed in new or existing plumbing systems with a standard pipe tee.
No access panel required (Consult local code).

MAINTENANCE:
Maintenance free – the piston is the only moving part.

TEMPERATURE RANGE:
-40°F to + 212°F (-4.4°C to + 100°C)

CONSTRUCTION:
Barrel-fabricated of type “L” hard drawn copper.

Cap:
Machined of free turning brass, attached to barrel with 95-5 solder.

Piston and threaded adapter:
Machined of free turning brass.

Seals:
“O”rings: EPDM.

Seal Lubricant:
Dow-Corning Silicone Compound #111, FDA listed for use in potable water systems.

Nickel Plated:
For Salt Water Application.

OPERATING PRESSURE:
Designed to operate on all domestic and commercial systems. Normal operating pressure 0 to 200 P.S.I.G., Max spike Pressure 400 P.S.I.G.

Water Hammer Arrestors are specified for commercial,industrial and residential uses.

PPP WATER HAMMER ARRESTORS
SPECIFIED FOR MANY INSTALLATIONS!