.jpg ",rotary-viscometer--mang-hinh-ky-thuat-so--tu-dong-78133,ROTARY VISCOMETER - Màng hình kỹ thuật số - Tự Động,,,,,,G-0009844-00019")
ROTARY VISCOMETER - Màng hình kỹ thuật số - Tự Động
MÁY QUAY ĐO ĐỘ NHỚT - CANNON
Model 2020 Rotary Viscometer
|
|
|
|
2020 Series Specifications
|
Shipping |
40 cm wide x 25 cm high x 38 cm deep (19 x 10 x 15 inches) |
|
Gross Weight: |
9 kg (20 lb) |
|
Net Weight: |
7.7 kg (17 lb) |
|
Power: |
115 VAC or 230 VAC, 50/60 Hz, 20 watts (please specify voltage when ordering) |
|
Spindle Speeds |
0.3, 0.5, 0.6, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 10, 12, 20, 30, 50, 60, 100 |
|
Accuracy: |
±1.0% full scale range in use |
|
Repeatability: |
±0.2% full scale range in use |
|
Operating |
LV-2020 measures viscosities between 1* and 2,000,000 cP MV-2020 measures viscosities between 100* and 13,000,000 cP |
Thông tin chi tiết, quí khách vui lòng liên hệ:
Công Ty TNHH Hoa Ý - Nhà phân phối độc quyền Cannon/Mỹ tại Việt Nam
Lâm Thị Thúy An - Phòng Kinh Doanh
Tel: 0918 844 870
Email: [email protected]
Skype: Anjuly_hoay
The CANNON Model 2020 Rotary Viscometers provide a convenient, low cost means for the determination of viscosity. These easy-to-use instruments measure the viscous drag of a liquid against a rotating spindle. A digital readout displays viscosity directly in centipoise (shown as cP) or milliPascal-seconds (shown as mPa·s). No calculations are required — just select spindle and speed, press the Motor On switch, and read the viscosity from the front panel display.
Model 2020 Rotary Viscometers are available in two types. The low viscosity LV-2020 model measures viscosity from 1* to 2,000,000 centipoise. The medium viscosity MV-2020 model measures viscosity from 100* to 13,000,000 centipoise. Both models allow measurement at 18 speeds ranging from 0.3 to 100 rpm. By choosing the proper speed/spindle combination, any viscosity within the range of the instrument can be measured. Measurements can also be made using the same spindle at different speeds to determine the rheological properties of a material at different shear rates. Viscosity measurements are taken four times per revolution.
The Model 2020 viscometers include a sophisticated display that shows the viscosity, % torque, and the speed/spindle in use. When the Auto Range button is pressed, the maximum (100%) torque viscosity attainable using the selected spindle at the selected speed is shown. A Select knob allows rapid scrolling through the available speed or spindle selections.
Model 2020 Rotary Viscometers come complete with appropriate spindles, viscometer stand, guard leg, and carrying case. The LV-2020 is provided with four spindles. The MV-2020 is provided with six spindles. An optional #1 spindle may be purchased for the MV-2020.
In the LV-2020, use of the optional UL Adapter is recommended for viscosities below 15 cP. In the MV-2020, use of the optional #1 spindle is recommended for viscosities between 100 and 400 cP. With the optional UL Adapter, the MV-2020 can measure viscosities down to 6.7 cP.
Chất Chuẩn Sigma
Máy Sấy Phun EYELA
Máy đo Độ Đục Lovibond - Nhanh, đơn giãn và chính xác
Bếp gia nhiệt 1 vị trí / nhiều vị trí
Máy đo Quang phổ - đa chỉ tiêu
Máy Lắc sàng rây
SV4000 Saybolt Viscosity
ACO-8/8as Automated Cleveland Open Cup Flash Point Tester
Máy đo điểm mềm tự động - ASP-5 Tanaka
ROTARY VISCOMETER - Màng hình kỹ thuật số - Tự Động
Glass Capillary Viscometers - Nhớt kế Cannon
TE 3000 Bể hằng nhiệt Cannon
Cảm ơn Quý khách đã quan tâm đến sản phẩm trên.
Hiện tại tài khoản doanh nghiệp đăng sản phẩm trên chưa được xác thực.
Để mua sản phẩm, Quý khách vui lòng liên hệ chi tiết theo địa chỉ: 406/63 Cộng Hòa, P 13, Tân Bình, HCM, hoặc Email: [email protected]
Trân trọng.
(Trong khuôn viên Tổng Công Ty Thái Sơn - Bộ Quốc Phòng)
Điện thoại: 02862.761612 - 02862.757416 - 090 315 0099
Email: [email protected]
