x
THÔNG BÁO
x
ĐĂNG NHẬP
x
ĐĂNG KÝ
1
Xác thực
2
Thông tin
3
Hoàn tất
Email
Mã bảo vệ
349606
Tiếp tục
x
x
Quên mật khẩu
Hủy
x
ACTIVE VIP

Vui lòng chọn gói VIP mong muốn

Gói 6 Tháng

350,000đ

Chọn

Gói 1 Năm

800,000đ

Chọn

Gói 2 Năm

1,000,000đ

Chọn
Hủy
Công ty TNHH TM KT Hưng Gia Phát.
Doanh Nghiệp Tiêu Chuẩn

Samson Vietnam

Samson Vietnam
(cập nhật 18-06-2015)
Giá bán
Liên hệ
ID Sản phẩm
G-0009992-00043
Cam kết
Hàng mới 100%
Xuất xứ
Bảo hành
Điện thoại
Email
Zalo

Công ty TNHH Thương Mại Kỹ Thuật Hưng Gia Phát là nhà phân phối sản phẩm Samson Vienam

Mr Dũng : 0938 710079

Email: [email protected]


Chúng tôi luôn tự hào là một trong những nhà cung cấp
Samson Vienam hàng đầu chuyên dùng cho ngành công nghiệp trong các dây chuyền sản xuất và trong các hệ thống điều khiển hoạt động của nhà máy, xí nghiệp hay các sản phẩm của công nghệ cao và chất lượng.

Chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như: Samson Vienam , Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump…







Samson Vietnam

Samson I/P Positioner

4763-0011 0012 110

(Model: 4763

Serial No: 001826

Part No. 4763-00110012110. 03)

Samson Vietnam

Water cooler thermoregulator "Samson" start to open: 60C +-2-72C-3 Dn 100. Valve type DN100, PN16, Kvs 125,housing EN-Jl 1040/A 126B, Flange type, thermostate type 2231 size 150, temp -10-+90st C, capillary 3m(4U)

Samson Vietnam

Water cooler thermoregulator "Samson" start to open: 50C +-2-62C-3 Dn 65. Valve type DN65, PN16, Kvs 50,housing EN-Jl 1040/A 126B, Flange type, thermostate type 2231 size 150, temp -10-+90st C, capillary 3m(4U)

Samson Vietnam

Samson Electric Actuator
Model: 3374-11
fail-safe action: Without
connection: For form fit-HVAC valves and V2001
thrust: 2500N stem extends, 2500N stem retracts
travel: 15mm
speed: Positioning speed 0.125mm/s
supply voltage: AC230V
frequency: 50Hz
positioner: With positioner 0(2)...10V/ 0(4)...20mA
switches: Without
Samson Electric Actuator
Model: 3374 11 (337411)
(Temperature Control Valve;
system: GAH (10 GPB + 3 IW),
model: 3374-11)

Samson Vietnam

Type: 3241 Valve
DN 50; PN 16; Body: Cast iron EN-JL1040 / A 126 B; Flanges
with raised face, Form B DIN EN 1092-2; Body gasket:
Graphite seal on metal core made of CrNiMo; Kvs 40 / Cv 47;
Equal percentage characteristic; 15 mm travel; Plug with
metal sealing (leakage class IV); Plug material 1.4006; Seat
material 1.4006; Seat with metal sealing; Packing
PTFE-carbon, spring-loaded; Connecting diameter 30 mm;
Bonnet for cast iron body
1015544
(SAMSON 32410 2 EN-JL 1040 DN50
PN16-558598 ;
POS.01-KV40
(control valve only))

Samson Vietnam

Type: 3767 Electropneumatic Positioner

Air connections ISO 228/1 - G 1/4; Electrical connection:

Cable gland M20 x 1.5 black (plastic); Reference variable

4...20 mA

Var- ID: 1046105

SAMSON 3767

Model 3767 - 00001220110000.06

Var- ID : 1046105

Serial No : 700618

Samson Vietnam

Type: 6116

input: 4...20mA

output: 0,2...1, bar

pneumatic connection: ISO-228/1 G1/4 electrical connection:

M20 x 1,5

IP65

weight: approx 2 KG

Note: item does not include flanges, screws and sealings

Samson Vietnam

Positioner 3730

Typ: 3730-1 with LCD and AUTOTUNE, command variable 4...20 mA, 2 software limit switches, hardware version GI 02, Software version 2.12

Var-ID: 2837382

(P poisoner

Model: 3730-1000000000000000000.02

O/P 4~20mA

Supply 6bar.90psi)

Samson Vietnam

Model: 3241-7 Control Valve

(3241-7 EN-JL1040 DN80

PN16

Description:

Valve 3241, DN80, PN16

- Body: type 3241 DN80; PN16;Cast iron

Flange raised face; Kvs 80/Cv 95

- Pneumactic actuator type 3277

range 0.4 to 2.0 bar

Valve closed without auxiliary power

- Postioner 3760

Pneumatic connections: 1/8 to 27 NPT

Cable gland: 20x1.5

reference variable 4 to 20 mA

- Mounting unit for type 3760)

Samson Vietnam

Type: 3241 Valve

DN 80; PN 16; Body: Cast iron EN-JL1040 / A 126 B;

Flanges with raised face, Form B DIN EN 1092-2; Body

gasket: Graphite seal on CrNiMo steel core; Kvs 80 / Cv 95;

Equal percentage characteristic; 15 mm travel; Plug with

metal sealing (leakage class IV); Plug material 1.4006; Seat

material 1.4006; Seat with metal sealing; Packing

PTFE-carbon, spring-loaded; Connecting diameter 30 mm;

Bonnet for cast iron body

1021195

Samson Vietnam

Type: 3277 Pneumatic Actuator

15 mm operating travel; Type 3277, diaphragm area 350

cm²; Diaphragm material NBR; Loading pressure

connection: ISO 228-1 G thread; Bench range 2.1 to 3.3 bar;

Fail-safe action "Stem extends"

1010623

Samson Vietnam

Type: 3760 Positioner

II 2 G EEx ia IIC T6 ATEX; Pneumatic connections 1/8 - 27

NPT; Electrical connection: Cable gland M20x1.5 black

(plastic); Type 6109 i/p Module; Reference variable 4...20

mA

1008202

Samson Vietnam

Mounting unit for Type 3760

Consisting of:; Mounting parts for direct attachment to Type

3277, 240 / 350 cm² (1400-6899); Range spring 1

(1400-6892); Zinc-plated steel piping; Direction of action:

Increasing / increasing

1012305

Samson Vietnam

Type: 4708 Supply Pressure Regulator

Type 4708-53 Supply Pressure Regulator, for mounting to

Types 373x/376x/378x Positioners (linear actuators);

Connection thread ISO-228/1, G 1/4; Set point range

0.5...6.0 bar, with pressure gauge (connection nickel-plated

brass); With 2 pressure gauges; Aluminum connecting part;

Filter in black plastic regulator body

1605388

Samson Vietnam

Model: 3241-7 Control Valve

(3241-7 EN-JL1040 DN80

PN16

Description:

Valve 3241, DN80, PN16

- Body: type 3241 DN80; PN16;Cast iron

Flange raised face; Kvs 80/Cv 95

- Pneumactic actuator type 3277

range 0.4 to 2.0 bar

Valve closed without auxiliary power

- Postioner 3760

Pneumatic connections: 1/8 to 27 NPT

Cable gland: 20x1.5

reference variable 4 to 20 mA

- Mounting unit for type 3760)

Samson Vietnam

Type: 3241 Valve

DN 80; PN 16; Body: Cast iron EN-JL1040 / A 126 B;

Flanges with raised face, Form B DIN EN 1092-2; Body

gasket: Graphite seal on CrNiMo steel core; Kvs 80 / Cv 95;

Equal percentage characteristic; 15 mm travel; Plug with

metal sealing (leakage class IV); Plug material 1.4006; Seat

material 1.4006; Seat with metal sealing; Packing

PTFE-carbon, spring-loaded; Connecting diameter 30 mm;

Bonnet for cast iron body

1021195

Samson Vietnam

Type: 3277 Pneumatic Actuator

15 mm operating travel; Type 3277, diaphragm area 350

cm²; Diaphragm material NBR; Loading pressure

connection: ISO 228-1 G thread; Bench range 2.1 to 3.3 bar;

Fail-safe action "Stem extends"

1010623

Samson Vietnam

Type: 3760 Positioner

II 2 G EEx ia IIC T6 ATEX; Pneumatic connections 1/8 - 27

NPT; Electrical connection: Cable gland M20x1.5 black

(plastic); Type 6109 i/p Module; Reference variable 4...20

mA

1008202

Samson Vietnam

Mounting unit for Type 3760

Consisting of:; Mounting parts for direct attachment to Type

3277, 240 / 350 cm² (1400-6899); Range spring 1

(1400-6892); Zinc-plated steel piping; Direction of action:

Increasing / increasing

1012305

Samson Vietnam

Type: 4708 Supply Pressure Regulator

Type 4708-53 Supply Pressure Regulator, for mounting to

Types 373x/376x/378x Positioners (linear actuators);

Connection thread ISO-228/1, G 1/4; Set point range

0.5...6.0 bar, with pressure gauge (connection nickel-plated

brass); With 2 pressure gauges; Aluminum connecting part;

Filter in black plastic regulator body

1605388

Samson Vietnam

Type: 44-8

DN 32; housing CC491K or CC499K (Rg5);

PN25; max temp 150°C; 1-4 bar; ∆p: 11 bar

(Type: 44-8 2720-02 1264199 0096

DN1”1/4; PN25

150oC;1-4 bar; ∆p: 11 bar)

Samson valves & control

Samson Vietnam

Type: 44-8

DN 50; housing CC491K or CC499K (Rg5);

PN25; max temp 150°C; 1-4 bar; ∆p: 11 bar

(Type: 44-8 2720-02 1306569 0096

DN2”; PN25

150oC;1-4 bar; ∆p: 11 bar)

Samson valves & control

Samson Vietnam

ID: 1653376 (1111715)

pneumatic actuator type 3372

with integrated i/p-positioner, i/p type

6109; G 1/4;

special version IP 65

(Control valve

Model: 3372-0511/9004.01)

Samson Vietnam

filter check valve in screw mounting housing G 1/2; IP 65

1790-7408

Samson Vietnam

Var-ID: 1008554

Limit Switch Type 4746

electrical, with electrical microswitches type

XGK 3 (silver contacts)

weight: approx. 0,7 kg/pc

(Model: 47466-03202X0.07

S.No: 700211)

Samson Vietnam

i/p-positioner type 3767

intrinsically safe Ex II 2 G EEx ia IIC T6 to

ATEX; air connections 1/4 - 18 NPT; electrical connection cable gland M 20 x 1,5 blue (plastic); reference variable 4...20 mA

Var-ID: 1591159 (1059000)

weight: ca. 1 kg/pc

Samson Vietnam

Var-ID: 1008623

Type: 4763 Electropneumatic Positioner

Intrinsically safe EX II 2 G EEx ia IIC T6 acc. to

ATEX; Lever I

(length 40 to 127 mm); Spring 2 (30 mm travel,

split range 15 mm); Pneumatic connections 1/4 - 18 NPT; Electrical connection: Cable gland M20 x 1.5, blue (plastic); Type 6109 i/p Module ; Reference variable 4-20 mA

weight: ca. 1,2 kg/pc

Samson Vietnam

ID: 1021195

Control Valve Typ 3241-7

DN 80; PN 16; Kvs-Wert 80 / Cv-Wert 95

Samson Vietnam

ID: 1010619

pneumatic actuator 3277

0,4...2,0 bar

Samson Vietnam

ID: 1634585 (1008180)

positioner type 3760

Pneumatic connections 1/8 - 27 NPT

Cable gland: 20x1.5

Samson Vietnam

ID: 1012305

mounting unit for Type 3760

Consisting of:; Mounting parts for direct attachment to Type 3277, 240 / 350 cm² (14006899); Range spring 1 (1400-6892); Zinc-platedsteel piping; Direction of action:

Increasing / increasing

Samson Vietnam

ID: 1605388

Type 4708 Supply Pressure Regulator

Type 4708-53 Supply Pressure Regulator, for mounting to Types

373x/376x/378x Positioners (linear actuators); Connection thread ISO 228/1, G ¼; Set point range 0.5...6.0 bar, with pressure gauge (connection nickel-plated brass); With 2 pressure gauges; Aluminum connecting part; Filter in black plastic regulator body

Samson Vietnam

ID: 1625194

Mounting unit for Type 4708

For Type 4708-53; Attached to a positioner;

Pneumatic supplementary connection in aluminum, ISO-228/1, G ¼ (1400-7400)

Samson Vietnam

Valve

Type: 3241

DN25;PN16

Var-ID: 1102350

(Valve DN25 - PN16, KV 10%

3241-1 EN-JL1040)

Samson Vietnam

Replaced by: 3241-7

Note: equivalent to the above positions, but complete mounted

(Valve DN25 - PN16, KV 10%

3241-1 EN-JL1040)

Samson Vietnam

Pneumatic actuator

Type: 3277

Var-ID: 1089719

(Pneumatic actutor 120 cm3

Var ID: 1089719

3277-031410910601010000.01)

Samson Vietnam

Controller

Type: 3767

Var-ID: 1046105

(Controller

var ID: 1046105

3767-00001220110000.06)

Samson Vietnam

Mounting set for 3766/3767

Var-ID: 1066572

Samson Vietnam

ID: 1605388

Type 4708 Supply Pressure Regulator

Type 4708-53 Supply Pressure Regulator, for mounting to Types

373x/376x/378x Positioners (linear actuators); Connection thread ISO 228/1, G ¼; Set point range 0.5...6.0 bar, with pressure gauge (connection nickel-plated brass); With 2 pressure gauges; Aluminum connecting part; Filter in black plastic regulator body

Samson Vietnam

ID: 1625194

Mounting unit for Type 4708

For Type 4708-53; Attached to a positioner;

Pneumatic supplementary connection in aluminum, ISO-228/1, G ¼ (1400-7400)

Samson Vietnam

Var-ID: 1008177

Type: 3760

pneumatic connections ISO 228/1 – G1/8;

electrical connection plastic cable gland M20x1.5: - Black; i/p type block 6109; reference variable 4 to 20 mA

weight: 0,6 kg/pc

(Positioner

Type : 3760-0012110)

Samson Vietnam

Var-ID: 1008177

Type: 3760

pneumatic connections ISO 228/1 – G1/8;

electrical connection plastic cable gland M20x1.5: - Black; i/p type block 6109; reference variable 4 to 20 mA

weight: 0,6 kg/pc

(Electropneumatic Positioner

3760-00012110-205633)

Samson Vietnam

Seat SB 110 DN 125 0110-2403

241/ 271/ 4763/ 4746 DN 125 pneum.

CA40580146

Note: could not be identified. Please send picture of

the nameplate of the valve.

Samson Vietnam

Compression spring DN 100-150

0270-1047

Samson Vietnam

Plug assembly, Kvs 200/Cv 230, %, 1.4404, DN 125, seat bore 110

1890-8009

Samson Vietnam

Wiper 16 x 22 x 3/4 NBR (16X22X3/4 NBR)

8429-0133

Samson Vietnam

Flat gasket - round DN125 PN16

241/ 271/ 4763/ 4746 DN 125 pneum.

CA40580146.

Kích thước: 141/192*2

Note: could not be identified. Please send picture of the nameplate of the valve.

Samson Vietnam

Seal

0430-0767

Samson Vietnam

Seal DN 200-400 PTFE Univerdit (PTFE)

0430-1100

Samson Vietnam

Graphite gasket 260 x 290 x 1.5, graphite/1.4401

8414-1510

Samson Vietnam

Diaphragm 1400 cm²

0520-0591

Samson Vietnam

Shaft sealing ring BA D 22 x 32 x 7 NBR, 1.4310

8406-0080

Samson Vietnam

Wiper, NBR / 1.4310

8429-0137

Samson Vietnam

Seat SB 150 DN 200, 1.4006

0110-4431

Samson Vietnam

Plug assembly, kvs 360, %, 1.4008 DN 200-250 SB 150

1690-3667

Samson Vietnam

Bushing DN 15-80, 1.4104

0310-0924

Samson Vietnam

Seat SB 24 DN 15-25 1.4006

0110-1791

(Seat KVS6,3/10 0100-1791

241/ 271/ 4763/ 4746 DN 25 pneum)

Samson Vietnam

Diaphragm 240 cm²

0520-0498

Samson Vietnam

Wiper 10 x 16 x 3/4,5 NBR

8429-0129

Samson Vietnam

Flat gasket - round

241/ 271/ 4763/ 4746 DN 25 pneum.

CA40580099

Note: could not be identified. Please send picture of

the nameplate of the valve.

Samson Vietnam

Seat SB 80 DN 65/80 1.4006

0110-1806

Samson Vietnam

Plug assembly, kvs 80, %, 1.4006 DN 80 SB 80

1090-6280

Samson Vietnam

Graphite gasket 102 x 120 x 1, graphite/1.4401

8414-1493

Samson Vietnam

Seat SB 38 DN 32-50 1.4006

0110-1798

Samson Vietnam

Plug assembly, Kvs 25, %, 1.4404, DN 32-50, seat bore 38

1090-5509

Samson Vietnam

Bellows assembly DN 15-80

1190-1837

Samson Vietnam

Seat above

3244/ 3271/ 4763 DN 80 pneum.

Note: could not be identified. Please send picture of the nameplate of the valve.

Samson Vietnam

Plug assembly, Kvs 80, %, 1.4404, DN 65/80, seat bore 80

1890-7990

Samson Vietnam

Graphite gasket 40 x 52 x 1, graphite/1.4401

8414-1482

Samson Vietnam

Shaft sealing ring, NBR /1.4310

8406-0025

Samson Vietnam

Seat, seat bore 24, DN 15-25 1.4404

0110-7716

(Cone KVS10

241/3271/4746 DN 25 pneum.

CA40030282)

Samson Vietnam

Graphite gasket 102 x 120 x 1, graphite/1.4401

8414-1493

Samson Vietnam

Packing Form Standard DN 15-50

1120-2401

Samson Vietnam

Flat gasket - round

3241/3277/3730 DN 50 pneum.

0901117809.

Kích thước: 50/102*2

Note: could not be identified. Please send picture of

the nameplate of the valve.

Samson Vietnam

Seat SB 63 DN 65/80 1.4006

0110-1805

Samson Vietnam

Plug assembly, kvs 60 %, 1.4006 DN 65/80 SB 63

1090-6278

Samson Vietnam

Flat gasket - round

3241/3277/3730 DN 65 pneum.

0901117742.

Kích thước:

65/122*2

Code: CA65010238

Note: could not be identified. Please send picture of

the nameplate of the valve.

Samson Vietnam

Service kit - EPDM

Regulating valve DN80 Kv75

Code: 9611-92-0423

Note: could not be identified. Please send picture of the nameplate of the valve.

Samson Vietnam

Actuator

Regulating valve DN80 Kv76

Code: 9612-5336-01

Note: could not be identified. Please send picture of the nameplate of the valve.

Samson Vietnam

Type: 4763

Electropneumatic Positioner Lever I (length 40 to 127 mm); Spring 2 (30 mm

travel, split range

15 mm); Pneumatic connections ISO 228/1 - G

1/4; Electrical

connection: Cable gland M20 x 1.5, black

(plastic); Type 6109 i/p

Module ; Reference variable 4-20 mA; Packed;

Var-ID: 1582908

1008579

(I/P Positioner Single-acting

Type : 4763 - 0

Model : 4763 - 00120012110.04

Supply max : 6 bar / 90 psi

Input : 4 … 20 mA

Serial no : 505638)

Samson Vietnam

Type: 6109 i/p Module

Version for for Type 4763/3760 Positioner; For

Type 4763/ 3760

Positioner; Input 4 to 20 mA; Output 0.2 to 1.0

bar;

Var-ID: 1008905

(I/P Module

6109-0010

In = 4…20 mA

Out = 0.2…1 bar

Serial no : 0105)

Samson Vietnam

Type: 4746

Limit Switch electric; With electric microswitches Model

XGK 3 (silver contacts);

with 2 switching elements; Electrical

connection: Cable gland M20

x 1.5 black (plastic); Packed;

Var-ID: 1638483

(1008554)

(Model : 4746 - 03202X0.07)

Samson Vietnam

Type: 4763

Electropneumatic Positioner

Lever I (length 40 to 127 mm); Spring 1 (15 mm

travel); Pneumatic

connections ISO 228/1 - G 1/4; Electrical

connection: Cable gland

M20 x 1.5, black (plastic); Type 6109 i/p Module

; Reference

variable 4-20 mA; Packed;

Var-ID: 1583208

(1008578)

(Oder no : 4763-00110012110.04)

Samson Vietnam

Type: 4763

Electropneumatic Positioner

Lever I (length 40 to 127 mm); Spring 3 (60 mm

travel, split range

30 mm); Pneumatic connections ISO 228/1 - G

1/4; Electrical

connection: Cable gland M20 x 1.5, black

(plastic); Type 6109 i/p

Module ; Reference variable 4-20 mA; Packed;

Var-ID: 1585596

(1008580)

(Oder no : 4763-00130012110.04)

Samson Vietnam

Type: 3730 Electropneumatic Positioner

Type 3730-1 with LCD and AUTOTUNE, 4 to 20

mA reference

variable, 2 software limit switches; Packed;

Hardware version

device index 02; Software version 2.12;

Var-ID: 2837382

(2836426)

(Model : 3730 - 100000000000.01)

Samson Vietnam

Type: 3760 Positioner

Cable gland M20x1.5 black (plastic); Type 6109 i/p Module;

Reference variable 4 to 20 mA; Packed;

Var-ID: 1626739

(1008177)

(Model : 3760 - 0012110.02)

Samson Vietnam

Type: 2231 Thermostat

Size 150; Set point range 50 to 150 °C; Sensor

PN 40/ANSI Class 150; Threaded nipple G 1; Immersion length 290 mm; Nickel-plated bronze sensor ; Capillary tube made of nickel-plated copper ; 3 m length;

Var-ID: 1010403

Samson Vietnam

Type: 2212 Safety Thermostat

Size 50; Limit range 30 to 170 °C; Thermowell

made of stainless

steel 1.4571; Thermowell connection G 1/2;

Thermowell PN 40;

Sensor with thermowell 190 x 12 mm; Copper

capillary tube;

Capillary tube length 5 m; With electric

triggering 230 V, 50 Hz;

Typetested acc. to DIN 14597; Copper sensor;

Var-ID: 1511887

Samson Vietnam

Type: 6116 i/p Converter

Type 6109 i/p Module; Input 4 to 20 mA; Output 0.2 to 1.0 bar;

Increasing/increasing; Electrical connection

M20 x 1.5; Pneumatic

connection ISO-228/1-G ¼; Degree of

protection IP 54; Packed;

Var-ID: 2043300

(1008974)

(Model: 616-022112000.01

Input: 4…20mA Output:0,2…1bar

Supply: 1,4 bar)

Samson Vietnam

Type: 3767 Electropneumatic Positioner

Air connections ISO 228/1 - G 1/4; Electrical

connection: Cable

gland M20 x 1.5 black (plastic); Reference

variable 4...20 mA;

Var-ID: 1046105

(SAMSON 3767

Model: 3767 - 00001220110000.06)

Samson Vietnam

I/P positioner single acting

SAMSON 3730-2

Positioner

Supply max 6bar/ 90 psi

input 4…20mA

Option :

- Fault indicator

- Limit switch. Software

Conductive : Ri = 348 Ohm

SPS-compatible : VDC <= +35V

Firmware 1.30

Model 3703 - 20 0000001000.01

Serial No. 5048729

Note: please check for Var-ID.

Samson Vietnam

Limit Switch Electric 4746

Model : 4746-13202X0.07

Serial no : 601865

Note: please check for Var-ID.

Samson Vietnam

Type: 6116 i/p Converter

Intrinsically safe Ex II 2G EEx ia IIC T6 acc. to

ATEX; Type 6109 i/p Module; Input 4 to 20 mA; Output 0.2 to 1.0 bar; Increasing/increasing; Electrical connection 1/2-14 NPT; Pneumatic connection 1/4 NPT; Degree of protection IP 54; Packed;

Var-ID: 2084557 (1009137)

(Model: 6116-2101110000.01)

Samson Vietnam

Type: 3760 Positioner

Pneumatic connections 1/8 - 27 NPT; Electrical

connection: Cable gland M20x1.5 black (plastic); Type 6109 i/p Module; Reference variable 4 to 20 mA; Packed;

Var-ID: 1634585 (1008180)

(Model: 3760-0020000.02)

Samson Vietnam

Type: 3730 Electropneumatic Positioner

Var-ID: 2836426

Type 3730-1 with LCD and AUTOTUNE, 4 to 20

mA reference variable, 2 software limit switches; Hardware version device index 02; Software version 2.12

Samson Vietnam

Type: 6116 i/p Converter

Flameproof enclosure Ex II 2G EEx d IIC T6

acc. to ATEX; Type 6109 i/p Module; Input 4 to 20 mA, without switch-off electronics; Output 0.2 to 1.0 bar; Increasing/increasing; Electrical connection M20 x 1.5; For attachment to positioners; Packed;

Var-ID: 2073658 (2031182)

(Converter 6116-2101110000.01)

Samson Vietnam

Type: 3760 Positioner

Pneumatic connections 1/8 - 27 NPT;

Reference variable 0.2 to 1.0 bar/3 to 15 psi;

Var-ID: 1008179

(Positiner 3760-0020000.02)

Samson Vietnam

Type 3277 Pneumatic Actuator

15 mm operating travel; Type 3277-5,

diaphragm area 120 cm²; Diaphragm material NBR; Bench range 1.4 to 2.3 bar; Fail-safe action "Stem extends"; Packed;

Var-ID: 1797229 (1089719)

weight: ca. 3,5 kg/pc

(Model: 327753104120.01)

Samson Vietnam

Samson Vietnam

VAR-ID: 1008905

i/p module type 6109

for positioner type 4763/3760, input 4...20mA, output 0,2...1,0 bar

(Positioner type 4763.

PN : 6109 - 1010.

In : 4 - 20 mA.

Out : 0,2 - 1 bar.

Serial : 206123.)

Samson Vietnam

Type 3241 Valve

DN 25; PN 40; Body: Forged steel/bar stock

1.4571; Flanges with raised face, Form B1 DIN EN 1092-1; Kvs 6.3 / Cv 7.5; Equal percentage characteristic; 15 mm travel; Plug with metal sealing (leakage class IV); Plug material 1.4404/1.4409; Seat material 1.4404/1.4409; Seat with metal sealing; Packing PTFE-carbon, spring-loaded; Body gasket: Graphite seal on CrNiMo steel core; Connecting diameter 30 mm; Bonnet made of CrNiMo steel;

Var-ID: 1036351

Samson Vietnam

VAR-ID: 1008905

i/p module type 6109

for positioner type 4763/3760, input 4...20mA, output 0,2...1,0 bar

(Positioner type 4763.

PN : 6109 - 1010.

In : 4 - 20 mA.

Out : 0,2 - 1 bar.

Serial : 206123.)

Samson Vietnam

Type 3241 Valve

DN 25; PN 40; Body: Forged steel/bar stock

1.4571; Flanges with raised face, Form B1 DIN EN 1092-1; Kvs 6.3 / Cv 7.5; Equal percentage characteristic; 15 mm travel; Plug with metal sealing (leakage class IV); Plug material 1.4404/1.4409; Seat material 1.4404/1.4409; Seat with metal sealing; Packing PTFE-carbon, spring-loaded; Body gasket: Graphite seal on CrNiMo steel core; Connecting diameter 30 mm; Bonnet made of CrNiMo steel;

Var-ID: 1036351

Samson Vietnam

Type: 6116 i/p Converter

Flameproof enclosure Ex II 2G EEx d IIC T6 acc. to ATEX; Type 6109 i/p Module; Input 4 to 20 mA; Output 0.2 to 1.0 bar; Increasing/increasing; Electrical connection 1/2-14 NPT; Pneumatic connection ISO-228/1-G ¼; Degree of protection IP 54; With output pressure gauge; Packed;

(6116-2101110000.01)

Samson Vietnam

Type: 3760 Positioner

II 2 G EEx ia IIC T6 acc. to ATEX; Pneumatic connections 1/8 - 27 NPT; Electrical connection: Cable gland M20x1.5 black (plastic); Type 6109 i/p Module; Reference variable 4 to 20 mA; Packed;

(3760-0020000.02)

Samson Vietnam

Type 3241-7 Control Valve

*Item completely assembled consisting of pos. 1,1-1,4

Please check if a positioner is needed and

whether the drive conforms to the technical requirements!!

(Model: 3277-53104120.01

Sr No. : 206020

Spring range : 1.4 – 2.3 bar

324102 1.4571

DN 25 PN 40

501562 Pos. 11)

Samson Vietnam

Var-ID: 1036282

Type 3241 Valve

DN 25; PN 40; Body made of forged steel/bar

stock 1.4571; Flanges with raised face, Form B1 DIN EN 1092-1; Kvs 10 / Cv 12; Equal percentage characteristic; 15 mm travel; Plug with metal sealing (leakage class IV); Plug material 1.4404/1.4409; Seat material 1.4404/1.4409; Seat with metal sealing; Packing PTFE-carbon, spring-loaded; Body gasket: Graphite seal on CrNiMo steel core; Connecting diameter 30 mm; Bonnet made of CrNiMo steel

Samson Vietnam

Var-ID: 1967064

Type 3277 Pneumatic Actuator

15 mm operating travel; Type 3277-5,

diaphragm area 120 cm²; Diaphragm material NBR; Bench range 1.4 to 2.3 bar; Fail-safe action "Stem extends"; Operating range: 1.85 to 2.3 bar

Samson Vietnam

Var-ID: 2885137

Type 3730 Electropneumatic Positioner

Type 3730-2 with LCD and AUTOTUNE, 4 to 20

mA reference variable, 2 software limit switches/1 fault alarm contact; EXPERTplus diagnostics; Hardware version device index 01; Software version 1.54

Samson Vietnam

Var-ID: 1061188

Mounting unit for Type 3730

Consisting of:; Mounting parts for direct

attachment to Type 3277, 120 cm², (1400-7452), with switchover/connecting plate; Pneumatic connecting plate G 1/4 (1400-7461)

Samson Vietnam

Type 3241-7 Control Valve

*Item completely assembled consisting of pos. 1,1-1,4

Please check if a positioner is needed and

whether the drive conforms to the technical requirements!!

(Model: 3277-53104120.01

Sr No. : 206020

Spring range : 1.4 – 2.3 bar

324102 1.4571

DN 25 PN 40

501562 Pos. 11)

Samson Vietnam

Var-ID: 1036282

Type 3241 Valve

DN 25; PN 40; Body made of forged steel/bar

stock 1.4571; Flanges with raised face, Form B1 DIN EN 1092-1; Kvs 10 / Cv 12; Equal percentage characteristic; 15 mm travel; Plug with metal sealing (leakage class IV); Plug material 1.4404/1.4409; Seat material 1.4404/1.4409; Seat with metal sealing; Packing PTFE-carbon, spring-loaded; Body gasket: Graphite seal on CrNiMo steel core; Connecting diameter 30 mm; Bonnet made of CrNiMo steel

Samson Vietnam

Var-ID: 1967064

Type 3277 Pneumatic Actuator

15 mm operating travel; Type 3277-5,

diaphragm area 120 cm²; Diaphragm material NBR; Bench range 1.4 to 2.3 bar; Fail-safe action "Stem extends"; Operating range: 1.85 to 2.3 bar

&nbs

LIÊN HỆ NHÀ CUNG CẤP

Công ty TNHH TM KT Hưng Gia Phát.
Samson Vietnam

    Cảm ơn Quý khách đã quan tâm đến sản phẩm trên.
    Hiện tại tài khoản doanh nghiệp đăng sản phẩm trên chưa được xác thực.
    Để mua sản phẩm, Quý khách vui lòng liên hệ chi tiết theo địa chỉ: tp hcm, hoặc Email: [email protected]
    Trân trọng.

X

Người mua

Người bán

Công ty TNHH TM KT Hưng Gia Phát.
Doanh Nghiệp Tiêu Chuẩn

Thông tin sản phẩm

Samson Vietnam
Mã hiệu: G-0009992-00043

Nội dung liên hệ

x
Đóng
CÔNG TY CP ĐẦU TƯ AMAKI
Địa chỉ: Toà nhà N7, số 3 đường 3/2, phường 11, Quận 10, Tp. HCM
(Trong khuôn viên Tổng Công Ty Thái Sơn - Bộ Quốc Phòng)
Điện thoại: 02862.761612 - 02862.757416 - 090 315 0099
Email: [email protected]
bộ công thương

Samson Vietnam

Samson Vietnam