Công ty Tăng Minh Phát Việt Nam là Nhà phân phối của hãng Ametek tại Việt Nam. Chúng tôi chuyên cung cấp Thiết bị đo độ cứng (model MT91) chính hãng Ametek giá cạnh tranh:

Email : [email protected]

[email protected]

Skype: long.tmpvietnam

Yahoo: longtmp

MT91 Series - Rockwell Microhardness Testers


The MT91 Series from Newage is an automatic micr
ohardness testing system that uses the Rockwell method for the hardness result. Hardness is measured based on the depth of penetration, rather than an optical system that determines based on the impression diameter. The MT91 test cycle is so fast that you can use it for process control – not just quality control. Test reliability is improved since there is no human interpretation of the impression measurement, so operators no longer need to maintain such a high skill levels.

Mounted test samples no longer need the same high level of preparation – or even mounting in some cases. Your case-depth analysis has now become much easier.

Setting up to test multiple specimens is simply point and shoot. You can set up as many as 24 traverses as part of a single procedure. Complicated staggered traverse procedures are easily created with the graphic setup utility.


Chúng tôi cung cấp đầy đủ các thiết bị chính hãng Ametek:

Pressure calibrator with IPI indicator (IPI10KG) with system F (Viton O-rings) Hydraulic pump type T (working range: 0-10,000psi) with dual output manifold, vernier valve, relief valve set include: IPI indicator range 0 to 10,000 psi, accuracy 0.05%, fitting, standard accessories, handpump, aluminium system carrying case and 1.5m pressure hose

IPI10KG-BXX-FOV-G

Ametek

IPI indicator

Range:0 ÷ 1 bar (15Psi); Pressure accuracy: ±0.05% F.S; C/W:

• Calibration certification performance traceable to NIST

• (3) AA batteries

• Adapter to 1/4" BSP male

• User manual

• Protective boot

IPI015G-BXX-IND-G

Ametek

IPI indicator

Range:0 ÷ 2 bar (30Psi); Pressure accuracy: ±0.05% F.S; C/W:

• Calibration certification performance traceable to NIST

• (3) AA batteries

• Adapter to 1/4" BSP male

• User manual

• Protective boot

IPI030G-BXX-IND-G

Ametek

IPI indicator

Range:0 ÷ 1000Psi; Pressure accuracy: ±0.05% F.S; C/W:

• Calibration certification performance traceable to NIST

• (3) AA batteries

• Adapter to 1/4" BSP male

• User manual

• Protective boot

IPI01KG-BXX-IND-G

Ametek

IPI indicator

Range:0 ÷ 2000Psi; Pressure accuracy: ±0.05% F.S; C/W:

• Calibration certification performance traceable to NIST

• (3) AA batteries

• Adapter to 1/4" BSP male

• User manual

• Protective boot

IPI02KG-BXX-IND-G

Ametek

IPI indicator

Range:0 ÷ 3000Psi; Pressure accuracy: ±0.05% F.S; C/W:

• Calibration certification performance traceable to NIST

• (3) AA batteries

• Adapter to 1/4" BSP male

• User manual

• Protective boot

IPI03KG-BXX-IND-G

Ametek

IPI indicator

Range:0 ÷ 5000Psi; Pressure accuracy: ±0.05% F.S; C/W:

• Calibration certification performance traceable to NIST

• (3) AA batteries

• Adapter to 1/4" BSP male

• User manual

• Protective boot

IPI05KG-BXX-IND-G

Ametek