Công ty Tăng Minh Phát Việt Nam là Nhà phân phối của hãng Pfeuffer tại Việt Nam. Chúng tôi chuyên cung cấp Thiết bị phân tích mạch nha trong phòng Lab (Malt Analysis - Friabilimeter) chính hãng PFEUFFER giá cạnh tranh:

Liên hệ cho chúng tôi theo số: 0907 300 847 - 0917 543 068 để được hỗ trợ và tư vấn.

Email : [email protected]

[email protected]

Skype: long.tmpvietnam

Yahoo: longtmp

Friabilimeter

Friability and whole hyaline of malt

• fast and easy analysing method
• practice-oriented determination of the brewing value
• simplifies the malt analysis
• robust and solid construction

Brewers need malts of high quality for the economic beer production. These malts must be produced and evaluated by maltsters. The Friabilimeter allows an easy and fast determination of the brewing value of malt in the practice. The Friabilimeter allows the control of the malt quality immediately after kilning. Irregularities during the malting process can be detected and corrected. The brewery can determine the malt quality immediately upon delivery and apply consistent malt blends accordingly. This avoids unnecessary problems.

A malt sample is separated mechanically into its hard and friable parts. For this purpose the grains are pressed against the rotating mesh wire by means of the pressure force of a rubber coated roller with constant pressure for a period of 8 minutes. The friable malt parts fall through the sieve wire, while glassy grains and hard parts remain inside the sieve drum.

A malt sample of 50 g ±0,01g is weighed and filled into the Friabilimeter. Then the instrument is switched on, the lateral pull handle is pulled downwards and locked into the bottom stop notch. After 8 minutes the instrument switches off. The glassy malt parts, which remained inside the sieve drum are weighed and the friability value referred to 100 % is calculated.

The hard malt parts are distinguished between part hyaline and whole hyaline. Increasing parts of whole hyaline grains reduce the brewing value. All grains, which are larger then ¾ are sorted out of the glassy malt parts. This fraction referred to 100 % is considered as whole hyaline. The contents of the sieve drum is shaked on a sorting sieve of 2,2 mm slit width for 60 seconds. The fraction left on the sieve is considered as part hyaline.

Excessive hyaline has an adverse effect on the mashing and lautering process. During the brewing process problems will arrise during the wort clarification, fermentation and filtration. In this connection influences depending on the type and the year are possible.

The Friabilimeter is an instrument for the determination of the friability of malt according to the EBC-method 4.15, MEBAK 4.1.3.6 and ASBC Malt-12. Pfeuffer GmbH has established a Friabilimeter-network in cooperation with the EBC-Analysis Committee for the determination of the obligatory reference friability value.

The setting of the Friabilimeter can be checked by means of a reference malt of known friability. By means of the adjustment screw located on the top side of the housing the instrument can be adjusted. The supplied calibration set is used for the control of the pressure roller and the spring pressure.

power supply
230 V* / 50 Hz (others on request !)

dimensions
400 x 265 x 270 mm

weight
12 kg

p/no. 1810 0000 Friabilimeter