Tụ bù phasecap của Epcos (Ấn độ). Tụ bù Epcos hiện đang được sử dụng rộng rãi ở Việt nam. Các loại tụ khô thông dụng, điện áp 440V

PhaseCap Compact capacitors

Construction

• Concentric winding: Homogeneous distribution of the winding pressure allows better flow of the self-healing gases. No stress overload near the core. Less internal soldering points result in more reliability.
• Compact design: Thanks to the concentric winding, small dimensions allow high packing density in the panel.

MKK-technology: Metallized polypropylene as dielectric and electrode make the MKK-series suitable for very high current load.

• Wavy cut and heavy edge: Special way of film cutting leads to lower contact resistance and thus leads to lower contact losses and a higher inrush current capability compared to the straight cut.
• Cylindrical aluminum can with stud: Easy installation, mounting position upright and/or horizontal possible.

Electrical

• Very high life expectancy: Reduced investments for maintenance and replacement.
• High inrush current withstand ability (up to 300 • IR) and high overcurrent capability (up to 1.5 … 2.0 • IR): High inrush and overcurrents mean an extreme stress to the capacitor. The higher the value of withstand ability, the longer the device will operate at best performance, thus avoiding premature failure.

Safely

• Self healing: The capacitor repairs itself after a punctual overload and remains fully functional during the process. Capacitance losses caused by self-healing are in a neglectable range.
• Overpressure disconnector: Straightforward disconnection at end of service life or in case of overpressure inside the capacitor.
• Touch proof terminals: Protection against electric shock, easy connection.
• Ceramic discharge resistor pre-mounted: Cable connection easy to set up, outstanding thermal dissipation, secure clamping point without affecting the main circuit.
  • Trân trọng Kính chào & hợp Tác với Quý Khách hàng gần xa
  • Mọi thông tin chi tiết vui lòng liên hệ:
  • POSOTEC Co., LTd
  • Trụ sở: 88A Trần Cao Vân – Phường Tam Thuận - QuậnThanh Khê - TP Đà Nẵng
  • VPGD: 1/9 Tô Ngọc Vân – Thanh Khê – Đà Nẵng
  • Kinhdoanh: 0934805966 Mr.Hung
  • Fax: 0511 374 5657
  • Email: [email protected] , [email protected]
  • Web: www.posotec.com