VR06 Paperless Recorder Thiết bị ghi nhận số liệu
Thiết bị ghi nhận dữ liệu Paperless Recorder loại 6 kênh, 9 kênh, 12 kênh, 15 kênh và 18 kênh:
VR06 PAPERLESS RECORDER
TỪ 1 Kênh -> 6 kênh
ĐẶC TÍNH NỔI BẬT:
- Màn hình màu LCD TFT với độ phân giải 640x480 pixels.
- Số ngõ vào ra:
- Có thể cài đặt tối đa 6 ngõ vào Analog.
- Có 6 khe cắm card I/O dễ dàng sử dụng (plug & play).
- Có sự linh hoạt cao:
- Người sử dụng có thể tự cấu hình card I/O của mình.
- Cấu trúc dạng modul mở rộng.
- Có thể cấu hình một cách linh hoạt cho màn hình hiển thị.
- Thân thiện với người sử dụng:
- Phím mềm kết hợp với hộp thoại tương tác đơn giản hóa thủ tục thiết lập và vận hành thiết bị.
- Dễ dàng sử dụng các phím chức năng.
- Máy dò hồng ngoại: Tắt màn hình để nâng cao tuổi thọ và tiết kiệm năng lượng khi không có sử dụng thiết bị.
- Tiết kiệm không gian: Dày 174mm (6.9”).
- Các kiểu hiển thị rất đa dạng: Biểu đồ đứng, ngang, biểu đồ cột, dạng số và dạng hỗn hợp.
- Lưu trữ dữ liệu trên: Flash ROM, CF card hoặc máy tính.
- Giao tiếp: Có sẵn cổng Ethernet ngoài ra có thể option thêm RS-232/422/485.
10. Độ chính xác cao: 18-bit A-D analog input, 15-bit D-A analog output.
11. Tốc độ lấy mẫu cao: 200ms cho tất cả 6 kênh, qua chương trình lọc và phương pháp lấy mẫu trung bình.
12. Thống kê giá trị: Instant, Average, Min/Max.
13. Có thể thiết lập báo động và tin nhắn khi có sự cố xảy ra.
14. Có thể di động khi kết hợp với tay cầm phía trên.
15. SPECIFICATIONS :
16. Power
90-250VAC, 47-63Hz, 60VA, 30W maximum
11-18VDC or 18-36 VDC, 60VA, 30W maximum
17. Display
6.4〞TFT LCD, 640X480 pixel resolution, 256 colors
18. Memory
8MB storage memory on board
Storage media: 128, 512 MB, 1 GB CF (Compact Flash) cards
19. Analog Input Cards (AI181, AI182, AI183)
Channels: AI181 ~ 1 channel, AI182 ~ 2 channels, AI183 ~ 3 channels
Resolution: 18 bits
Sampling Rate: 5 times/ second
Maximum Rating: -2 VDC minimum, 12 VDC maximum (1 minute for mA input)
Temperature Effect: ±1.5 μV/ μC for all inputs except mA ±3.0 μV/ μC for mA input
Sensor Lead Resistance Effect:
T/C: 0.2 μV/ohm
3-wire RTD: 2.6 μC /ohm of resistance difference of two leads
2-wire RTD: 2.6 μC /ohm of resistance sum of two leads
Burn-out Current: 200nA
Common Mode Rejection Ratio (CMRR): 120dB
Normal Mode Rejection Ratio (NMRR): 55dB
Isolation Breakdown Voltage between channels: 430VAC min.
Sensor Break Detection:
Sensor opened for TC, RTD and mV inputs,
below 1 mA for 4-20mA input, below 0.25V for 1-5V inputs,
unavailable for other inputs.
Sensor Break Responding Time:
Within 10 seconds for TC, RTD and mV inputs,
0.1 second for 4-20 mA and 1-5V inputs.
20. Characteristics:
Type |
Range |
Accuracy@ 25 °C |
Input Impedance |
J |
-120 ~ 1000 °C |
±1 °C |
2.2MΩ |
K |
-200 ~ 1370 °C |
±1 °C |
2.2MΩ |
T |
-250 ~ 400°C |
±1 °C |
2.2MΩ |
E |
-100 ~ 900 °C |
±1°C |
2.2MΩ |
B |
0 ~ 1820 °C |
±2°C |
2.2MΩ |
R |
0 ~ 1768 °C |
±2°C |
2.2MΩ |
S |
0 ~ 1768 °C |
±2°C |
2.2MΩ |
N |
-250 ~ 1300 °C |
±1 °C |
2.2MΩ |
L |
-200 ~ 900 °C |
±1 °C |
2.2MΩ |
PT100 |
-210 ~ 700 °C |
±0.4°C |
1.3KΩ |
PT100 |
-200 ~ 600 °C |
±0.4°C |
1.3KΩ |
mV |
-8 ~ 70mV |
±0.05% |
2.2MΩ |
mA |
-3 ~ 27mA |
±0.05% |
70.5Ω |
0~1V |
-0.12 ~ 1.15V |
±0.05% |
32KΩ |
0~5V |
-1.3 ~ 11.5V |
±0.05% |
332KΩ |
1~5V |
-1.3 ~ 11.5V |
±0.05% |
332KΩ |
0~10V |
-1.3 ~ 11.5V |
±0.05% |
332KΩ |
21. Analog Input Cards (AI183V)
Type |
Range |
Accuracy@ 25 °C |
Input Impedance |
-60~60mV |
-62~62mV |
±0.1% |
2.2 MΩ |
-2~2V |
-2.2~2.2V |
±0.3% |
332KΩ |
-20~20 V |
-22~22 V |
±0.1% |
332KΩ |
-20~20 mA |
-22~22 mA |
±0.1% |
70.5Ω |
22. Digital Input Card (DI181)
Channels: 6 per card Logic
Low: -5V minimum, 0.8V maximum
Logic High: 2V minimum, 5V maximum
External pull-down Resistance: 1KΩ maximum
External pull-up Resistance: 1.5MΩ minimum
23. Digital Output Card (DO181)
Channels: 6 per card
Contact Form: N.O. (form A)
Relay Rating: 5A/240 VAC, life cycles 200,000 for resistive load
24. Analog Output Card (AO183I, AO183V)
Channels: 3 per card Output signal: AO183I: 4-20mA, 0-20mA, AO183V: 0-5V, 1-5V, 0-10V
Resolution: 15 bits
Accuracy:±0.05% of Span ±0.0025% /°C
Load Resistance: 0-500 ohms (current), 10K ohms minimum (voltage)
Output Regulation: 0.01% for full load change
Output Setting Time: 0.1 second (stable to 99.9%)
Isolation Breakdown Voltage: 1000VAC min.
Integral Linearity Error:±0.005% of Span
Temperature Effect:±0.0025% of Span /°C
25. 24VDC Auxiliary Power Supply Card (AP181)
Channels: to be used for 6 transmitters
Output Rating: 24±1 VDC, 180mA in maximum, 30mA / each channel
26. COMM Module (CM181)
Interface: RS-232 (1 unit), RS-485 or RS-422 (up to 247 units)
Protocol: Modbus Protocol RTU mode
Address: 1-247
Baud Rate: 0.3~38.4 Kbits/sec.
Measured data Bits: 7 or 8 bits
Parity Bit: None, Even or Odd
Stop Bit: 1 or 2 bits
27. Standard Ethernet Communication
Protocol: Modbus TCP/IP, 10 Base T
Ports: AUI (Attachment Unit Interface) and RJ-45, Auto- detect capability
28. Infrared Detector
Distance: Detect moving human body in distance around 2 meters
Time delayed: 10, 20, 30, 40, 50 or 60 minutes to be defined
29. Real time clock accuracy vs. temperature inside of housing
Temperature inside housing typical error per month
10 ~ 40 °C 18 seconds
0 °C or 50 ° C52 seconds
-10°C or 60 °C 107 seconds
30. Environmental & Physical
Operating Temperature: 5 ~ 50 °C
Storage Temperature: -25 ~ 60 °C
Humidity: 20 to 80% RH (non-condensing), maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 40°C
Altitude: 2000 M maximum
Insulation Resistance: 20 M ohms min. (at 500 VDC)
Dielectric Strength: 1350 VAC, 50/60 Hz for 1 minute
Vibration Resistance: 10-55 Hz, 10m/ s2for 2 hours
Shock Resistance: 30m/ s2(3g) for operation, 100g for transportation
Operation Position: no inclined restriction
Dimensions: Panel Mount style: 166(W) x 144(H) x 174mm(D)
Bench Top style: 166 (W) x 192 (H) x 194mm (D)
Standard Panel Cutout: DIN size in 138 x 138mm
31. Approval Standards
Safety: UL61010C-1,
CSA C22.2 No. 24-93
CE: EN61010-1 (IEC1010-1)
over voltage category II, Pollution degree 2
Protective Class:
IP 30 front panel for indoor use,
IP 20 housing and terminals
EMC:
Emission: EN61326 (EN55022 class A, EN61000-3-2, EN61000-3-3)
Immunity: EN61326 (EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11)
32. ORDERING CODE :
VR06 - |
□ |
□ |
□ |
□ |
- |
□ |
□ |
□ |
- |
□ |
□ |
□ |
|
1 |
2 |
3 |
4 |
- |
5 |
6 |
7 |
- |
8 |
9 |
10 |
1 Power
4: 90-250 VAC, 47-63 Hz
5: 20-28 VAC, 47-63 Hz
6: 11-18 VDC
7: 18-36 VDC
8. 36-72 VDC
9: Special order
2 Analog Input Card
0: none
1: 1 channel withAI181
2: 2 channels with AI182
3: 3 channels with AI183
4: 4 channels with AI181 & AI183
5: 5 channels with AI182 & AI183
6: 6 channels with AI183
7: 6channels with AI183&AI183V
G: 3 channels with AI183V
H: 6 channels with AI183V
*See AI181/2/3(V) in Accessories below.
3 Digital Input Card
0: none
1: 6 channels 4: 24 channels
2: 12 channels 5: 30 channels
3: 18 channels 6: 36 channels
4 Digital Output Card
0: none
1: 6 relays 3: 18 relays
2: 12 relays 4: 24 relays
5 Communication
0: standard Ethernet interface
1: RS-232/422/485 ( three in one ) + Ethernet interface
9: special order
6 PC software
1: Free basic software Observer I for non-communication application
2: Extensive software Observer II for communication of RS-232/422/485 or Ethernet
7 Firmware
0: Basic function
1: with Mathematics, Counter & Totalizer & FDA 21 CFR part 11 compliance
8 Storage Media
1. 512 MB Compact Flash card
6: 1 GB Compact Flash card
X: other options
9 Case/Mounting
4: standard panel mounting, grey case
5: Bench top / portable style with handle, USA power cable, grey case
6: Bench top with handle, European power cable, grey case
10 Special Option
0: none
1: 24VDC auxiliary power supply ( for transmitter, 6 channels )
2: 3-channel current output
3: 6-channel current output
4: 9-channel current output
D: 3-channel voltage output
E: 6-channel voltage output
F: 9-channel voltage output
G: panel mounting with rear power plug & Europe power cable.
5: panel mounting with rear power plug & USA power cable
6: panel mounting with front power switch
7: 7=1+5
8: 8=1+6
9: 9=1+5+6
X: other options
Note:
* Standard model without option VR06-4X00-011-140
* The rear slots of the recorder will only accept up to 6 optional cards in any combination
*
VR06 - channel paperless recorder
VR06 PAPERLESS RECORDER
ĐẶC TÍNH NỔI BẬT:
1. Màn hình màu LCD TFT với độ phân giải 640x480 pixels.
2. Số ngõ vào ra:
- Có thể cài đặt tối đa 6 ngõ vào Analog.
- Có 6 khe cắm card I/O dễ dàng sử dụng (plug & play).
3. Có sự linh hoạt cao:
- Người sử dụng có thể tự cấu hình card I/O của mình.
- Cấu trúc dạng modul mở rộng.
- Có thể cấu hình một cách linh hoạt cho màn hình hiển thị.
4. Thân thiện với người sử dụng:
- Phím mềm kết hợp với hộp thoại tương tác đơn giản hóa thủ tục thiết lập và vận hành thiết bị.
- Dễ dàng sử dụng các phím chức năng.
5. Máy dò hồng ngoại: Tắt màn hình để nâng cao tuổi thọ và tiết kiệm năng lượng khi không có sử dụng thiết bị.
6. Tiết kiệm không gian: Dày 174mm (6.9”).
7. Các kiểu hiển thị rất đa dạng: Biểu đồ đứng, ngang, biểu đồ cột, dạng số và dạng hỗn hợp.
8. Lưu trữ dữ liệu trên: Flash ROM, CF card hoặc máy tính.
9. Giao tiếp: Có sẵn cổng Ethernet ngoài ra có thể option thêm RS-232/422/485.
10. Độ chính xác cao: 18-bit A-D analog input, 15-bit D-A analog output.
11. Tốc độ lấy mẫu cao: 200ms cho tất cả 6 kênh, qua chương trình lọc và phương pháp lấy mẫu trung bình.
12. Thống kê giá trị: Instant, Average, Min/Max.
13. Có thể thiết lập báo động và tin nhắn khi có sự cố xảy ra.
14. Có thể di động khi kết hợp với tay cầm phía trên.
SPECIFICATIONS :
Power
90-250VAC, 47-63Hz, 60VA, 30W maximum
11-18VDC or 18-36 VDC, 60VA, 30W maximum
Display
6.4〞TFT LCD, 640X480 pixel resolution, 256 colors
Memory
8MB storage memory on board
Storage media: 128, 512 MB, 1 GB CF (Compact Flash) cards
Analog Input Cards (AI181, AI182, AI183)
Channels: AI181 ~ 1 channel, AI182 ~ 2 channels, AI183 ~ 3 channels
Resolution: 18 bits
Sampling Rate: 5 times/ second
Maximum Rating: -2 VDC minimum, 12 VDC maximum (1 minute for mA input)
Temperature Effect: ±1.5 μV/ μC for all inputs except mA ±3.0 μV/ μC for mA input
Sensor Lead Resistance Effect:
T/C: 0.2 μV/ohm
3-wire RTD: 2.6 μC /ohm of resistance difference of two leads
2-wire RTD: 2.6 μC /ohm of resistance sum of two leads
Burn-out Current: 200nA
Common Mode Rejection Ratio (CMRR): 120dB
Normal Mode Rejection Ratio (NMRR): 55dB
Isolation Breakdown Voltage between channels: 430VAC min.
Sensor Break Detection:
Sensor opened for TC, RTD and mV inputs,
below 1 mA for 4-20mA input, below 0.25V for 1-5V inputs,
unavailable for other inputs.
Sensor Break Responding Time:
Within 10 seconds for TC, RTD and mV inputs,
0.1 second for 4-20 mA and 1-5V inputs.
Characteristics:
Type |
Range |
Accuracy@ 25 °C |
Input Impedance |
J |
-120 ~ 1000 °C |
±1 °C |
2.2MΩ |
K |
-200 ~ 1370 °C |
±1 °C |
2.2MΩ |
T |
-250 ~ 400°C |
±1 °C |
2.2MΩ |
E |
-100 ~ 900 °C |
±1°C |
2.2MΩ |
B |
0 ~ 1820 °C |
±2°C |
2.2MΩ |
R |
0 ~ 1768 °C |
±2°C |
2.2MΩ |
S |
0 ~ 1768 °C |
±2°C |
2.2MΩ |
N |
-250 ~ 1300 °C |
±1 °C |
2.2MΩ |
L |
-200 ~ 900 °C |
±1 °C |
2.2MΩ |
PT100 |
-210 ~ 700 °C |
±0.4°C |
1.3KΩ |
PT100 |
-200 ~ 600 °C |
±0.4°C |
1.3KΩ |
mV |
-8 ~ 70mV |
±0.05% |
2.2MΩ |
mA |
-3 ~ 27mA |
±0.05% |
70.5Ω |
0~1V |
-0.12 ~ 1.15V |
±0.05% |
32KΩ |
0~5V |
-1.3 ~ 11.5V |
±0.05% |
332KΩ |
1~5V |
-1.3 ~ 11.5V |
±0.05% |
332KΩ |
0~10V |
-1.3 ~ 11.5V |
±0.05% |
332KΩ |
Analog Input Cards (AI183V)
Type |
Range |
Accuracy@ 25 °C |
Input Impedance |
-60~60mV |
-62~62mV |
±0.1% |
2.2 MΩ |
-2~2V |
-2.2~2.2V |
±0.3% |
332KΩ |
-20~20 V |
-22~22 V |
±0.1% |
332KΩ |
-20~20 mA |
-22~22 mA |
±0.1% |
70.5Ω |
Digital Input Card (DI181)
Channels: 6 per card Logic
Low: -5V minimum, 0.8V maximum
Logic High: 2V minimum, 5V maximum
External pull-down Resistance: 1KΩ maximum
External pull-up Resistance: 1.5MΩ minimum
Digital Output Card (DO181)
Channels: 6 per card
Contact Form: N.O. (form A)
Relay Rating: 5A/240 VAC, life cycles 200,000 for resistive load
Analog Output Card (AO183I, AO183V)
Channels: 3 per card Output signal: AO183I: 4-20mA, 0-20mA, AO183V: 0-5V, 1-5V, 0-10V
Resolution: 15 bits
Accuracy:±0.05% of Span ±0.0025% /°C
Load Resistance: 0-500 ohms (current), 10K ohms minimum (voltage)
Output Regulation: 0.01% for full load change
Output Setting Time: 0.1 second (stable to 99.9%)
Isolation Breakdown Voltage: 1000VAC min.
Integral Linearity Error:±0.005% of Span
Temperature Effect:±0.0025% of Span /°C
24VDC Auxiliary Power Supply Card (AP181)
Channels: to be used for 6 transmitters
Output Rating: 24±1 VDC, 180mA in maximum, 30mA / each channel
COMM Module (CM181)
Interface: RS-232 (1 unit), RS-485 or RS-422 (up to 247 units)
Protocol: Modbus Protocol RTU mode
Address: 1-247
Baud Rate: 0.3~38.4 Kbits/sec.
Measured data Bits: 7 or 8 bits
Parity Bit: None, Even or Odd
Stop Bit: 1 or 2 bits
Standard Ethernet Communication
Protocol: Modbus TCP/IP, 10 Base T
Ports: AUI (Attachment Unit Interface) and RJ-45, Auto- detect capability
Infrared Detector
Distance: Detect moving human body in distance around 2 meters
Time delayed: 10, 20, 30, 40, 50 or 60 minutes to be defined
Real time clock accuracy vs. temperature inside of housing
Temperature inside housing typical error per month
10 ~ 40 °C 18 seconds
0 °C or 50 ° C52 seconds
-10°C or 60 °C 107 seconds
Environmental & Physical
Operating Temperature: 5 ~ 50 °C
Storage Temperature: -25 ~ 60 °C
Humidity: 20 to 80% RH (non-condensing), maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 40°C
Altitude: 2000 M maximum
Insulation Resistance: 20 M ohms min. (at 500 VDC)
Dielectric Strength: 1350 VAC, 50/60 Hz for 1 minute
Vibration Resistance: 10-55 Hz, 10m/ s2for 2 hours
Shock Resistance: 30m/ s2(3g) for operation, 100g for transportation
Operation Position: no inclined restriction
Dimensions: Panel Mount style: 166(W) x 144(H) x 174mm(D)
Bench Top style: 166 (W) x 192 (H) x 194mm (D)
Standard Panel Cutout: DIN size in 138 x 138mm
Approval Standards
Safety: UL61010C-1,
CSA C22.2 No. 24-93
CE: EN61010-1 (IEC1010-1)
over voltage category II, Pollution degree 2
Protective Class:
IP 30 front panel for indoor use,
IP 20 housing and terminals
EMC:
Emission: EN61326 (EN55022 class A, EN61000-3-2, EN61000-3-3)
Immunity: EN61326 (EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11)
ORDERING CODE :
VR06 - |
□ |
□ |
□ |
□ |
- |
□ |
□ |
□ |
- |
□ |
□ |
□ |
|
1 |
2 |
3 |
4 |
- |
5 |
6 |
7 |
- |
8 |
9 |
10 |
1 Power
4: 90-250 VAC, 47-63 Hz
5: 20-28 VAC, 47-63 Hz
6: 11-18 VDC
7: 18-36 VDC
8. 36-72 VDC
9: Special order
2 Analog Input Card
0: none
1: 1 channel withAI181
2: 2 channels with AI182
3: 3 channels with AI183
4: 4 channels with AI181 & AI183
5: 5 channels with AI182 & AI183
6: 6 channels with AI183
7: 6channels with AI183&AI183V
G: 3 channels with AI183V
H: 6 channels with AI183V
*See AI181/2/3(V) in Accessories below.
3 Digital Input Card
0: none
1: 6 channels 4: 24 channels
2: 12 channels 5: 30 channels
3: 18 channels 6: 36 channels
4 Digital Output Card
0: none
1: 6 relays 3: 18 relays
2: 12 relays 4: 24 relays
5 Communication
0: standard Ethernet interface
1: RS-232/422/485 ( three in one ) + Ethernet interface
9: special order
6 PC software
1: Free basic software Observer I for non-communication application
2: Extensive software Observer II for communication of RS-232/422/485 or Ethernet
7 Firmware
0: Basic function
1: with Mathematics, Counter & Totalizer & FDA 21 CFR part 11 compliance
8 Storage Media
1. 512 MB Compact Flash card
6: 1 GB Compact Flash card
X: other options
9 Case/Mounting
4: standard panel mounting, grey case
5: Bench top / portable style with handle, USA power cable, grey case
6: Bench top with handle, European power cable, grey case
10 Special Option
0: none
1: 24VDC auxiliary power supply ( for transmitter, 6 channels )
2: 3-channel current output
3: 6-channel current output
4: 9-channel current output
D: 3-channel voltage output
E: 6-channel voltage output
F: 9-channel voltage output
G: panel mounting with rear power plug & Europe power cable.
5: panel mounting with rear power plug & USA power cable
6: panel mounting with front power switch
7: 7=1+5
8: 8=1+6
9: 9=1+5+6
X: other options
Note:
* Standard model without option VR06-4X00-011-140
* The rear slots of the recorder will only accept up to 6 optional cards in any combination
Mọi chi tiết thắc mắc xin vui lòng liên hệ :
CÔNG TY TNHH TMV KỸ THUẬT TỰ ĐỘNG NHẬT QUANG
Đc: 17M /1 Đường HT12, KP.3, P. Hiệp Thành, Quận 12, TP.HCM
Tel: (84 - 8). 3597 0374 Hp: 0902 688 937
Email: [email protected]
Webiste:www.nhatquangta.com.vn. http://www.brainchild.com.tw/
VR06 - channel paperless recorder, VR06 - channel paperless recorder, VR06 - channel paperless recorder, VR06 - channel paperless recorder, VR06 - channel paperless recorder, VR06 - channel paperless recorder, VR06 - channel paperless recorder, Brainchild, Brainchild, BrainChild, BrainChild. Brainchild, Brainchild, BrainChild, BrainChild. Brainchild, Brainchild, BrainChild, BrainChild. Brainchild, Brainchild, BrainChild, BrainChild. Brainchild, Brainchild, BrainChild, BrainChild. Brainchild, Brainchild, BrainChild, BrainChild. Brainchild, Brainchild, BrainChild, BrainChild. Brainchild, Brainchild, BrainChild, BrainChild. Brainchild, Brainchild, BrainChild, BrainChild. Brainchild, Brainchild, BrainChild, BrainChild. Brainchild, Brainchild, BrainChild,
Đồng hồ nhiệt BrainChild C21
Application of paperless recorder
Đồng hồ đo nhiệt độ BrainChild BTC 4100
Màn hình HMI 730 - Human Machine Interface HMI
Đồng hồ đo nhiệt độ BrainChild BTC 9100
Màn hình HMI 1550 Human Machine Interface HMI
Đồng hồ nhiệt BrainChild C91
Bộ điều khiển nhiệt độ cho đường ống
Đồng hồ đo nhiêt độ BrainChild BTC 9090
HMI 1050- Human Machine Interface HMI
Đồng hồ đo nhiệt độ BrainChild C21
Đồng hồ nhiệt -Fuzzy + PID Controller BTC 9300
Cảm ơn Quý khách đã quan tâm đến sản phẩm trên.
Hiện tại tài khoản doanh nghiệp đăng sản phẩm trên chưa được xác thực.
Để mua sản phẩm, Quý khách vui lòng liên hệ chi tiết theo địa chỉ: , hoặc Email: [email protected]
Trân trọng.
(Trong khuôn viên Tổng Công Ty Thái Sơn - Bộ Quốc Phòng)
Điện thoại: 02862.761612 - 02862.757416 - 090 315 0099
Email: [email protected]