LIÊN HỆ NHÀ CUNG CẤP
ID Doanh nghiệp: G-0010475
Địa chỉ: 602/41e điện biên phủ, p22, q. Bình Thạnh
Điện thoại: 0911 175 069
Email: [email protected]
Bộ điều khiển lực căng TC920V Nireco
The TC920V Tension Controller can be used with a wide range of web manufacturing and treatment processes to automatically control the tension of a moving web to a constant value. Digital calculation allows a wider range of functions than previous products, but the controller can still be operated in the intuitive style of an analog device. This controller combines stable and precise tension control with excellent cost performance.
Control knobs for frequently-used operations
Control knobs are used for tension settings and manual settings to give a familiar feel.
A four-digit LED display is used for quick and easy checking and an LCD display for more extensive information.
Simple zero and span adjustment on installation
Automatic adjustment functions make adjustment a simple process. Tension control is conducted with the start contact only. The system automatically outputs pre-output on startup, and slack-prevention output on stop.
Excellent responsivity and stability
Proportional and integral action are augmented by our renowned fixed loop gain calculation.
Connection with a wide range of tension sensors
Can be connected to the following wide range of Nireco sensors: MB, MG, MC, CD, MJ, CJ, TSA, and intrinsically safe TSA sensors
Free choice of actuators
Electromagnetic brakes and clutches, pneumatic brakes and clutches and torque motors can be used.
Compatible with automatic paper splicing
The new/old spindle switching signal produces paper splicing preset output for paper splicing withlittle variability.
Diameter measurement function
An encoder or other suitable sensor can be connected to measure roll diameter.
Loop Gain Correction Circuit Provides Excellent Responsiveness and Stability
Tension Signal Converter
Digitally display the sum or product of the No. 1 and No. 2 tension sensor tensions.
A control calculator compares the tension signal from the tension display with the target tension, and reduces any variation. Additionally, the ever-popular constant loop-gain control delivers superb control stability and responsiveness, regardless of coil diameter.
When the magnetic brake/clutch on the final control element is used, the power of the control signal is increased, and output at 0 to 24 V (4A). When the air brake/clutch is used, 4 to 20 mA is output to the electro-pneumatic converter. When a torque motor is used, a 0 to 10 V (2mA) voltage signal is output to the motor driver.
Specifications Power supply voltage Power consumption Current capacity Mass EnvironmentOperating ambient temperature Operating ambient humidity Vibration resistance Power source noise Operating ambient atmosphere Rated tension Tension sensors that can be connected to the TC920V OutputOutput for measurement External setting power supply Power supply for external setting Contact outputZero tension output
Minimum diameter output
Automatic control output InputSensor input Analog input Contact input Pulse generator Gate generatorDetection for speed and diameter
100 to 240V AC 50/60Hz 300VA (Entry cuurent 60Atyp (20ms)) 1.5A (200V) 6kg 0 to +50°C 35 to 85%RH (no condensation) 3.5mm, 1G, 3 to 150Hz, 3 directions (for one hour) 2kV, normal mode, pulse width of common mode 50 nS,
1 uS (depends on the noise simulator) Place free from water droplets, inflammable gas, corrosive gas, corrosive gas, and dust 10～10000N MB, MG, MC, CD, MJ, CJ, TSA, and intrinsically safe TSA tension sensors. Tension value voltage output (0 to 10VFS (1 mA or less))
Current output for tension value meter (0 to 1mA/FS)
0 to 10V (1 mA or less), 4 to 20mA (470Ω or less)
0 to 24V (4A or less) Power supply for external setting Number of outputs, 3
(DC30V 0.2A, AC200V 0.2A) 12mA) 12V DC