x
THÔNG BÁO
x
ĐĂNG NHẬP
x
ĐĂNG KÝ
(Miễn phí)
1
Xác thực
2
Thông tin
3
Hoàn tất
Email
Mã bảo vệ
174585
Tiếp tục
x
x
Quên mật khẩu
Hủy
x
ACTIVE VIP

Vui lòng chọn gói VIP mong muốn

Vip 1 Năm

5,000,000đ

Chọn

Liên Hệ Tư Vấn Thêm

Chọn
Hủy

Đại lý Durag tại Việt Nam liên hệ

(cập nhật 07-09-2016)
Đại lý Durag tại Việt Nam

Đại lý Durag tại Việt Nam

(cập nhật 07-09-2016)

ID: G-0010464-00114

Giá bán
Liên hệ
Người đăng
Điện thoại
0989077459
Email
Địa chỉ
Địa chỉ: 602/41E Điện Biên Phủ, Phường 22, Quận Bình Thạnh, TP Hồ Chí Minh

Chúng tôi chuyên cung cấp các thiết bị công nghiệp.

Công ty TNHH TM DV Tăng Minh Phát (TMP) xin gửi lời cảm ơn chân thành đến quý khách hàng đã, đang và sẽ sử dụng dịch vụ của chúng tôi. Kính chúc Quý Khách sức khỏe, hạnh phúc và thịnh vượng.

Chúng tôi đang là nhà phân phối và thực hiện dịch vụ thiết bị Tự Động Hóa như : Van công nghiệp Cảm biến, Biến Tần, PLC, HMI, Motor, Motor Servo, Relays……, của nhiều hãng lớn đến từ các nước như: Đức, Mỹ, Nhật, Ý, Hàn Quốc, Pháp.... Đảm bảo uy tín , chất lượng , giá cả cạnh tranh, hợp tác lâu dài, giúp giảm các chi phí , giải quyết các nhu cầu cho khách hàng!

Hiện nay chúng tôi đang là đại lý phân phối của hãng Durag Vietnam:

Mr. Nghĩa

Hotline: 0914537669

Email: [email protected]

DURAG-GERMANY

check and control the fire in burners and turbines

1.1 Environmental Monitoring:

1.1.1 Data Management

1.1.2 Tunnel Sensors

1.1.3 Measuring Systems
Dust Monitoring: (D-R290; D-R220; D-R300-40; D-R300; D-RX250; D- R800; D-R820F; D- RC80; F-904-20)

Filter Monitoring: (D-FW230B; D-FW231; D-FW240Ex)

Volume Flow Meters: (D-FL100; D-FL200; D-FL220)

Mercury Analyzing: (HM 1400 TRX Total Mercury Monitoring

Ambient Monitoring: (F-701-20 Beta Gauge Particulate Monitor)

1.2. Combustion Technology

Burner Controls:(D-GF150; D-GF55; D-AM150)

lame Sensors : (D-LE103; D-LE603; D-LE701; D-LE703;

Flame Monitors: D-LX100 (Ex); D-LX200; D-LX700; D-LX720)

Control Units: (D-UG120; D-UG660; AAL75; D-IR55; D-UV55)

Video and Thermography Systems(D-VTA 100-10; D-VTA 100-20)

Accessories

1.3. Pilot Burner & Burner Products

DURAG Spark Ignition System: D-HG400; D-HG55; D-ZL; D-VE500

- HEGWEIN Gas Fired Igniters

- HEGWEIN Oil Fired Igniters

HEGWEIN Dual-Oil & Oil/Gas Igniters

SMITSVONK Gas Fired Igniters

- HEGWEIN Gas Burners

SMITSVONK Spark Ignition System

DURAG offers a complete selection of boiler instrumentation products:
High Energy Spark Igniter D-HG 400
Combustion Automation Units and Flame Monitors D-GF 55, D-UV 55-10, D-IR 55-10, D-IO 55-10
All-In-One Flame Scanner D-LX 100
Flame Sensors D-LE 100/101 and D-LE 600/601
Flame Scanner Control System D-UG 110
Flame Scanner Control System D-UG 120
Flame Scanner Control System D-UG 660
Flame Sensor D-LE 701/703 with Fiber Optic System D-LL 702/703/704
Gas-fired Igniters with built-in flame monitoring

They feature:
Solid construction for long-life and minimal maintenance
Compact designs will fit easily into your existing plans and reduce the number of equipment purchases
Excellent customer support from our engineers keeps your installation in operation
Easy installation lets your employees get the equipment operating promptly
Our self-checking equipment ensures your facility is running safely

High Energy Spark Igniter D-HG 400

Download the D-HG 400 Brochure
(Adobe.pdf file; 0.8MB)
Ignition of liquid or gas fuels in high-capacity industrial burners
Compact design: control unit and ignition lance as one modular unit
Available as explosion-proof model with separate ignition lance
Retraction unit D-VE 404 for automatic burner ignition
Available with 5/8 inch lance as direct replacement for Peabody TM and ForneyTM systems.
Portable unit with battery pack also available
Dry contact or pushbutton start units available

Combustion Automation Units and Flame Monitors
D-GF 55, D-UV 55-10, D-IR 55-10, D-IO 55-10

Download the 55 Series Brochure
(Adobe.pdf file; 0.8MB)
For intermittent operation
Low cost combustion automation units and flame monitors without self-check
Regulation and Monitoring of oil- and gas-burners with intermittent operation
Simple Installation
No adjustments required
Meets the requirements of UL 372 and FM Class 7610

All-In-One Flame Scanner D-LX 100

View the Expanded Specifications

Download the LX 100 Brochure
(Adobe.pdf file; 0.8MB)
Main application at industrial single burners with continuous or intermittent operation, e.g. in chemical industries, refineries or cement plants
New semiconductor technology with highest sensitivity replaces UV tube for UV flame detection
Compact design, flame scanner and amplifier built as one unit, therefore, no space is
needed inside a cabinet
Self-checking and failsafe according to UL 372, FM 7610 as well as EN 230 and EN 298
Housing meets NEMA 4x (IP 67).
Relay output contact for direct control of the fuel valve and for status display
Programmable flame recognition threshold
Analog output for flame intensity
0/4 - 20 mA
Fulfills EMC guidelines IEC 555 and IEC 1000 as well as EN 50 081 and EN 50 082

Flam Sensors D-LE 100/101 and D-LE 600/601

Download the LE 100/101/600/601 Brochure
(Adobe.pdf file; 0.6MB)
Flame sensors for every spectral range of flame monitoring from
UV to IR
Connection to the control units
D-UG 110 and D-UG 600 and to programming units D-GF 100
and D-GF 200
Uniform output signal thus mutually interchangeable
Adjustable to differing combustion conditions, e.g. combustion of
waste gas

Flame Scanner Control System D-UG 660

Download the D-UG 660 Brochure
(Adobe.pdf file; 0.4MB)
Monitoring of flames in the UV and IR range (depending on the flame scanner of the series D-LE 100/D-LE 101 or D-LE 600/D-LE601)
Sensitivity adjustable in 3 ranges and 100 steps
Flame intensity displayed in percent
Pulse frequency indication for flame stability monitoring
TÜV approved for oil/gas continuous operation for 72 operating hours without capacity limitations
UL and FM listed

Flame Sensor D-LE 701/703 with
Fiber Optic System D-LL 702/703/704
Optical flame sensor with fiber optics for various spectral ranges, from UV to IR
Typical applications include:
Tiltable bucket burners
Cylindrical rotary kilns
Burners with narrow sighting tubes
Burners with very high ambient temperatures around the sighting tube
Burners in which the view from the sighting tube is obscured by high particulate levels
Can be used in conjunction with the D-UG 110/120/660 controllers and D-GF 100/200 combustion automation unit
Uniform output signal thus mutually interchangeable
Can be adjusted for different combustion conditions, e.g., flue
gas recirculation
Corresponds to current American and European safety requirements for flame monitoring equipment

Mua quyền ưu tiên cho t

X

Liên hệ mua sản phẩm

H56X9W
Đại lý Durag tại Việt Nam
Mã hiệu: G-0010464-00114
Địa chỉ:
CÔNG TY TNHH QUỐC TẾ AMAKI
Địa chỉ: Toà nhà N7, số 3 đường 3/2, phường 11, Quận 10, Tp. HCM
(Trong khuôn viên Tổng Công Ty Thái Sơn - Bộ Quốc Phòng)
Điện thoại: 028 6658 9888
Email: [email protected]
bộ công thương

Durang D-R 220 M - Đại lý Durag tại Việt Nam - Durag Vietnam

Durang D-R 220 M - Đại lý Durag tại Việt Nam - Durag Vietnam