PU FLOORING-Polyurethane Resin
INTRODUCTION
Rockmax PU98 is a four components heavy duty polyurethane screed flooring system with solvent free, seamless and texture matt finished. Provide excellent resistance to chemical, impact, abrasion and hot water steam impact include very good resistance in thermal shock. Design for 5-9 mm thickness.
AREA OF USES
ADVANTAGES
APPLICATION AND INSTALLATION
PREPARATION
Concrete must be sound, clean and free from cement paste, dust, dirt and any other contaminants. The surface must be treated by mechanical means such as shot blasting, grinding, scrabbling or water jet for increase bonding between substrate and flooring system. Concrete must be at least 25N/mm2 Compressive strength and minimum tensile strength (pull off) at 1.5 N/mm2. The concrete surface must be visibly-dry no dark areas on concrete surface which excess moisture. The working ambient and surface temperature should not below 10ºC while installation. All movement joints must be prepared prior to installation flooring system. If moisture content in concrete higher than 4% Moisture Barrier must be applied. All grove joints must be prepared at 5mm width x 5mm depth around the edge, intersection, joints, drains, gutters and etc.
APPLICATION
Trained and approved specialist applicator was required to be installed this products.
PACKAGING
32 kg set.
INTRODUCTION
Rockmax PU54 is a 3 components polyurethane resin based, one layer, self leveling flooring system. It designed for high impact resistance, abrasion resistance and chemical resistance. Be able to achieve from 3-5mm thickness.
AREA OF USES
ADVANTAGES
APPLICATION AND INSTALLATION
PREPARATION
Concrete must be sound, clean and free from cement paste, dust, dirt and any other contaminants. The surface must be treated by mechanical means such as shot blasting, grinding, scrabbling or water jet for increase bonding between substrate and flooring system. Concrete must be at least 25N/mm2 Compressive strength and minimum tensile strength (pull off) at 1.5 N/mm2. The concrete surface must be visibly-dry no dark areas on concrete surface which excess moisture. The working ambient and surface temperature should not below 10ºC while installation. All movement joints must be prepared prior to installation flooring system. If moisture content in concrete higher than 4% Moisture Barrier must be applied. All grove joints must be prepared at 5mm width x 5mm depth around the edge, intersection, joints, drains, gutters and etc.
APPLICATION
Trained and approved specialist applicator was required to be installed this products.
PACKAGING
20 kg set.
INTRODUCTION
Rockmax PU33 is a 3 component solvent free, seamless polyurethane concrete mortar for vertical system with a matt finished. Use for apply vertical coving from 3mm to 9mm thickness by layer.
AREA OF USES
Rockmax PU33 must use combination with Rockmax 54 and Rockmax 98 application including:
ADVANTAGES
APPLICATION AND INSTALLATION
PREPARATION
Concrete must be sound, clean and free from cement paste, dust, dirt and any other contaminants. The surface must be treated by mechanical means such as shot blasting, grinding, scrabbling or water jet for increase bonding between substrate and flooring system. Concrete must be at least 25N/mm2 Compressive strength and minimum tensile strength (pull off) at 1.5 N/mm2. The concrete surface must be visibly-dry no dark areas on concrete surface which excess moisture. The working ambient and surface temperature should not below 10ºC while installation. All movement joints must be prepared prior to installation flooring system. If moisture content in concrete higher than 4% Moisture Barrier must be applied. All grove joints must be prepared at 5mm width x 5mm depth around the edge, intersection, joints, drains, gutters and etc.
APPLICATION
Trained and approved specialist applicator was required to be installed this products.
PACKAGING
32 kg set.
INTRODUCTION
Rockmax PU Primer is two components solvent free polyurethane primer for polyurethane flooring system. Good adhesion and penetrating to concrete surface and Low viscosity.
AREA OF USES
Rockmax PU Primer is used to primer surfaces prior to apply Polyurethane flooring.
ADVANTAGES
APPLICATION AND INSTALLATION
PREPARATION
Concrete must be sound, clean and free from cement paste, dust, dirt and any other contaminants. The surface must be treated by mechanical means such as shot blasting, grinding, scrabbling or water jet for increase bonding between substrate and flooring system. Concrete must be at least 25N/mm2 Compressive strength and minimum tensile strength (pull off) at 1.5 N/mm2. The concrete surface must be visibly-dry no dark areas on concrete surface which excess moisture. The working ambient and surface temperature should not below 10ºC while application.
MIXING
Mixer must use low speed drill mixer (500 rpm) with and including non-aerating steel paddle such as jiffy paddle. Make sure all tools and equipments are in good conditions and clean. Add part A and part B into the mixing drum. Mix for 2 minutes to achieve fully homogeneous consistent.
APPLICATION
Trained and approved specialist applicator was required to be installed this products. Apply Rockmax PU Primer 2 coats if the concrete surface is very porous. Apply PU flooring application “wet on wet” the primer still tacky.
PACKAGING
10kg set.
Part A: 6.67 kg
part B: 3.33 kg
CHẤT CHỐNG THẤM
CHẤT TRÁM
VỮA SỬA CHỮA BÊ TÔNG
VỮA TĂNG ĐỘ CỨNG
BĂNG CẢN NƯỚC
Floor Hardener & Dust Proofer FLOORING
Epoxy Resin FLOORING
PU FLOORING-Polyurethane Resin
Cảm ơn Quý khách đã quan tâm đến sản phẩm trên.
Hiện tại tài khoản doanh nghiệp đăng sản phẩm trên chưa được xác thực.
Để mua sản phẩm, Quý khách vui lòng liên hệ chi tiết theo địa chỉ: , hoặc Email: [email protected]
Trân trọng.
(Trong khuôn viên Tổng Công Ty Thái Sơn - Bộ Quốc Phòng)
Điện thoại: 02862.761612 - 02862.757416 - 090 315 0099
Email: [email protected]
