Cảm biến chỉnh biên UH01
Chúng tôi chuyên cung cấp các thiết bị công nghiệp.
Web Control Systems
Edge Position Control Systems(Sensors) ULTRASONIC SENSOR UH01 series Overview | Explosion prevention system | Specifications |
The Ultrasonic Sensor UH01 / UH01A is designed especially to detect transparent film and photosensitive material in EPC(Edge Position Control)system.
It can detect the edge of a web with high accuracy, not affected by irregularities in the coating near the edge of transparent film and printed patterns, which is conventionally impossible by optical sensors. Combined with Nireco,s controller, an electrical EPC system and electro-hydraulic EPC system can be constructed. The UH01A is a version of our UH01 ultrasonic sensor with a longer internal length(the distance from the sensor center position to the inner side of the casing). Internal lengths of 200mm, 300mm, 400mm and 500mm are available. The internal length of the UH01 is 60mm (fixed).
Explosion prevention system Intrinsically Safe Anti-explosion Construction Systems
Notes :
1. This field wiring shows connection with a Nireco-recommended safety barrier.
If a different safety barrier is used, be sure to select a suitable barrier and wire it correctly to avoid compromising the conditions for intrinsic safety construction.
2. Read "Instruction manual QJ3758.*-E" before beginning wiring work or using the equipment.
3. Carry out wiring work in accordance with the National Electrical Code ANSI / NFPA 70 and the Local Electrical Codes.
4. FM intrinsic safety construction Class I, Division 1, Group D, T4, Class I, Zone 0, AEx ia IIa T4.
Specifications UH01UH01AUH01SUH01SASensor gapEffective detection lengthFrequency responseSensor outputPower supplyAmbient humidityAmbient mperatureMass
48mm 8mm 200Hz Hi modeWhen fully closed 0V, When fully opened +5V DC
Lo mode
When fully closed 0mV, When fully opened +300mV DC
Resistance load of at least 2kΩ When fully closed 0V,
When fully opened +300mV DC DC+15V(100mA)
DC-15V(50mA) DC +7 to +12V(70mA) 35 to 85%RH (no condensation) 0 to +50℃ 0.36kg
Đại lý Moog VietNam
Bộ điều khiển nhiệt độ UP150
ESPB-030U , ELAW-31 Matsushima
Đại lý phân phối của hãng Vaisala tại Việt Nam
Mô-đun hiển thị chính hãng Masibus VietNam
Bộ điều khiển lực căng TC920V Nireco
Cảm biến vị trí biên chính hãng NIRECO
Đại lý Sauter Vietnam - Cân phân tích ABS-N/ABJ-NM Sauter - TMP Vietnam
Đại lý SMC VietNam
MGD-15A Máy sấy nhựa Matsui
Đại lý Sauter VietNam
MAGNA MIKE thiết bị đo dộ dày chai
(Trong khuôn viên Tổng Công Ty Thái Sơn - Bộ Quốc Phòng)
Điện thoại: 028 6658 9888
Email: [email protected]