Web Control Systems
Tension Control Systems MB Tension Sensor Overview |　 Feature |　 Specifications | Overview

The MB Tension Sensor was designed to be used with a tension controller or tension meter.
It supports a wide range of products, with any tension range. The MB Tension Sensor has long been a strong seller, since sales were launched 20 years ago.

Feature
Proven Track Record and Reliability

Without bearings or similar mechanical contacts, and employing a non-contact detection method using a differential transformer, the MB Tension Sensor is highly responsive with low hysteresis. The compact size also requires little space for installation.

Easy to Install

The MB 05, 11, and 25 can be installed at any angle.

Wide Selection of Sensors

①Full range available, from low tension (100 N full scale) to high tension (10,000 N full scale)

②All sensors have intrinsically safe construction.

Overload Resistant

The durable construction provides resistance to momentary overloads.

Specifications ModelMB05BMB05AMB11BMB11AMB25BMB25AMB33BMB33AMB41Rated tension (N)Roll displacement (μm/N)Allowable roll weight (kg)Allowable overload (N)Unit weight (kg)Tension resultant directionMounting angleSupply voltageAmbient temperatureApplicable bearings

(50)100 200 (50)100 200 500 1000 (2000)
3000 5000 10000 2.38 1.19 2.63 1.30 0.44 0.22 0.071 0.045 0.023 10 20 10 20 50 100 300 350 700 Ten times rated load 1.5 0.8 3.4 16.1 24 Forward or reverse possible Forward only (reverse impossible) Any desired angle DC +6V -10 to +60℃ - Note
1. Figures for rated tension and allowable roll weight are for double-sided detection. For single detection the above figures should be halved.
2. A 5m cable with connectors for connection to an amplifier is supplied.
3. MB05, MB11 and MB25 can be wall mounted with a bracket. If the unit is equipped with a bracket, "-W" is added to the end of its model name. e.g.
MB11B-W.
4. Sensors with inherently intrinsic safety construction are also available. "S" is added to the end of the corresponding model name. e.g. MB11BS.