HiC2031 - SMART Current Driver - Đại Lý Pepperl Fuchs

Nhà sản xuất: Pepperl Fuchs

Nhà cung cấp: Newskyvn

Model : HiC2031

Tên sản phẩm: SMART Current Driver

Liên hệ để được tư vấn hỗ trợ Mr.Thanh:

Email: [email protected]

Zalo: 0965.130.856

Đại lý Pepperl Fuchs Việt Nam

THÔNG SỐ KỸ THUẬT CỦA HiC2031

General specifications Signal type Analog output Functional safety related parameters Safety Integrity Level (SIL) SIL 2 Systematic capability (SC) SC 3 Supply Connection SL1: 1a(-), 1b(-); 2a(+), 2b(+) Rated voltage 19 ... 30 V DC bus powered via Termination Board Ripple ≤ 10 % Rated current ≤ 30 mA at 24 V Power dissipation ≤ 600 mW at 20 mA and 500 Ω load Power consumption ≤ 700 mW Input Connection side control side Connection SL1: 8a(+), 7a(-) Input signal 4 ... 20 mA , limited to approx. 26 mA Input voltage open loop voltage of the control system < 30 V Voltage drop approx. 6 V at 20 mA Input resistance > 100 kΩ, with field wiring open Output Connection side field side Connection SL2: 5a(+), 5b(-) Voltage ≥ 13 V at 20 mA Current 4 ... 20 mA Load 0 ... 650 Ω Ripple 20 mV rms Transfer characteristics Deviation at 20 °C (68 °F), 4 ... 20 mA
< 0.1 % of full scale, incl. non-linearity and hysteresis
Influence of ambient temperature < 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F)) Frequency range field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)
control side into the field side: bandwidth with 1 mApp signal 0 ... 3 kHz (-3 dB) Rise time 10 to 90 % ≤ 10 ms Galvanic isolation Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V Input/power supply basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff Output/power supply safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V Indicators/settings Display elements LED Labeling space for labeling at the front Directive conformity Electromagnetic compatibility

Directive 2014/30/EU EN 61326-1:2013 (industrial locations) Conformity Electromagnetic compatibility NE 21:2017
EN 61326-3-2:2018
For further information see system description. Degree of protection IEC 60529:2001 Protection against electrical shock UL 61010-1:2012 Ambient conditions Ambient temperature -40 ... 70 °C (-40 ... 158 °F) Mechanical specifications Degree of protection IP20 Mass approx. 100 g Dimensions 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) Mounting on Termination Board Coding pin 1 and 3 trimmed
For further information see system description. Data for application in connection with hazardous areas EU-type examination certificate CESI 06 ATEX 017
Marking II (1)G [Ex ia Ga] IIC
II (1)D [Ex ia Da] IIIC
I (M1) [Ex ia Ma] I
Output Ex ia Supply

Maximum safe voltage 250 V AC (Attention! Um is no rated voltage.) Equipment SL2: 5a(+), 5b(-)
Voltage Uo 25.2 V
Current Io 100 mA
Power Po 630 mW
Internal capacitance Ci 5.7 nF
Internal inductance Li negligible Certificate CESI 19 ATEX 027 X
Marking II 3G Ex ec IIC T4 Gc Directive conformity

Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015 International approvals FM approval

FM certificate FM 19 US 0122 X , FM 19 CA 0065 X
Control drawing 116-0470 (cFMus) UL approval E106378
Control drawing 116-0458 (cULus) IECEx approval

IECEx certificate IECEx CES 06.0002X
IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Ex ec IIC T4 Gc General information Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications HiC2031

SystemClasscode ECLASS 11.0 27210120 ECLASS 10.0.1 27210120 ECLASS 9.0 27210120 ECLASS 8.0 27210120 ECLASS 5.1 27210120 ETIM 8.0 EC002653 ETIM 7.0 EC002653 ETIM 6.0 EC002653 ETIM 5.0 EC001485 UNSPSC 12.1 32101514