UC6000-30GM-2EP-IO-V15- Cảm biến siêu âm - Pepperl+Fuchs Vietnam

Nhà sản xuất: Pepperl+Fuchs

Nhà cung cấp: Newskyvn

Model : UC6000-30GM-2EP-IO-V15

Tên sản phẩm: Cảm biến siêu âm

Liên hệ để được tư vấn hỗ trợ Mr.Thanh:

Email: [email protected]

Zalo: 0965.130.856

Đại lý Pepperl Fuchs Việt Nam

Datasheet excerpt: Technical data of UC6000-30GM-2EP-IO-V15 Pepperl Fuchs

Product Description Single head system General specifications Sensing range 350 ... 6000 mm Adjustment range 400 ... 6000 mm Dead band 0 ... 350 mm Standard target plate 100 mm x 100 mm Transducer frequency approx. 65 kHz Response delay minimum : 140 ms
factory setting: 280 ms Memory Non-volatile memory EEPROM Write cycles 100000 Indicators/operating means LED green solid: Power on
flashing: Standby mode or IO link communication LED yellow 1 solid: Object in evaluation range
flashing: Learning function, object detected LED yellow 2 solid: Object in evaluation range
flashing: Learning function, object detected LED red solid red: Error
red, flashing: program function, object not detected Electrical specifications Operating voltage 10 ... 30 V DC , ripple 10 %SS No-load supply current ≤ 60 mA Power consumption ≤ 1 W Time delay before availability ≤ 200 ms Interface Interface type IO-Link Protocol IO-Link V1.0 Transfer rate Acyclical: typical 44 Bit/s Cycle time min. 72 ms Mode COM2 (38.4 kBit/s) Process data width 16 bit SIO mode support yes Input/Output Input/output type 1 synchronization connection, bidirectional
0 Level 0 ... 1 V
1 Level 4 V ... UB
Input impedance > 12 kΩ
Output rated operating current < 12 mA
Pulse length 0.5 ... 300 ms (level 1)
Pulse interval ≥ 74 ms (level 0) Synchronization frequency

Common mode operation ≤ 13 Hz
Multiplex operation ≤ 14 Hz / n , n = number of sensors , n ≤ 10
(factory setting: n = 5 ) Output UC6000-30GM-2EP-IO-V15 Output type 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected Rated operating current 200 mA , short-circuit/overload protected Voltage drop ≤ 2.5 V Repeat accuracy ≤ 0.1 % of full-scale value Switching frequency ≤ 1.5 Hz Range hysteresis 1 % of the adjusted operating range (default settings), programmable Temperature influence ≤ 1.5 % from full-scale value (with temperature compensation)
≤ 0.2 %/K (without temperature compensation) Compliance with standards and directives Standard conformity

Standards EN IEC 60947-5-2:2020
IEC 60947-5-2:2019 Approvals and certificates UL approval cULus Listed, Class 2 Power Source CCC approval CCC approval / marking not required for products rated ≤36 V Ambient conditions Ambient temperature -25 ... 70 °C (-13 ... 158 °F) Storage temperature -40 ... 85 °C (-40 ... 185 °F) Mechanical specifications Connection type Connector plug M12 x 1 , 5-pin Housing diameter 73 mm Degree of protection IP67 Material

Housing Stainless steel 1.4305 / AISI 303
TPU
Polyamides
Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam Mass 165 g Factory settings Output 1 near switch point: 400 mm
far switch point: 6000 mm
output function: Window mode
output behavior: NO contact Output 2 near switch point: 500 mm
far switch point: 3000 mm
output function: Window mode
output behavior: NO contact Beam width wide

Classifications UC6000-30GM-2EP-IO-V15

SystemClasscode ECLASS 11.0 27272803 ECLASS 10.0.1 27272803 ECLASS 9.0 27272803 ECLASS 8.0 27272803 ECLASS 5.1 27272803 ETIM 8.0 EC001849 ETIM 7.0 EC001849 ETIM 6.0 EC001849 ETIM 5.0 EC001849 UNSPSC 12.1 41111960 Số lượng 1 Xuất xứ Chính hãng