OBR12M-R103-2EP-IO-L - Cảm biến quang điện - Đại lý Pepperl fuchs

Nhà sản xuất: Pepperl Fuchs

Nhà cung cấp: Newskyvn

Model : OBR12M-R103-2EP-IO-L

Tên sản phẩm: Cảm biến quang điện

Liên hệ để được tư vấn hỗ trợ Mr.Thanh:

Email: [email protected]

Zalo: 0965.130.856

Đại lý Pepperl Fuchs Việt Nam

Bảng thông số kỹ thuật của cảm biến OBR12M-R103-2EP-IO-L

Pepperl Fuchs

Product Description Laser retroreflective sensor General specifications Effective detection range 0 ... 12 m Reflector distance 0.25 ... 12 m Threshold detection range 15 m Reference target H50 reflector Light source laser diode Light type modulated visible red light Polarization filter yes Laser nominal ratings Note LASER LIGHT , DO NOT STARE INTO BEAM Laser class 1 Wave length 680 nm Beam divergence > 5 mrad d63 < 2 mm in the range of 250 mm ... 750 mm Pulse length 1.6 µs Repetition rate max. 17.6 kHz max. pulse energy 9.6 nJ Diameter of the light spot approx. 30 mm at a distance of 12 m Angle of divergence approx. 0.3 ° Ambient light limit EN 60947-5-2 Functional safety related parameters MTTFd 672 a Mission Time (TM) 20 a Diagnostic Coverage (DC) 0 % Indicators/operating means Operation indicator LED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode Function indicator Yellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve Control elements Light-on/dark-on changeover switch Control elements sensitivity adjustment Parameterization indicator IO link communication: green LED goes out briefly (1 Hz) Electrical specifications Operating voltage 10 ... 30 V DC Ripple max. 10 % No-load supply current < 20 mA at 24 V supply voltage Protection class III Interface Interface type IO-Link ( via C/Q = pin 4 ) Transfer rate COM 2 (38.4 kBaud) IO-Link Revision 1.1 Min. cycle time 2.3 ms Process data width Process data input 2 Bit
Process data output 2 Bit SIO mode support yes Device ID 0x110205 (1114629) Compatible master port type A Output Switching type The switching type of the sensor is adjustable. The default setting is:
C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - WH: NPN normally closed / light-on, PNP normally open / dark-on Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected Switching voltage max. 30 V DC Switching current max. 100 mA , resistive load Usage category DC-12 and DC-13 Voltage drop ≤ 1.5 V DC Switching frequency 2000 Hz Response time 250 µs Conformity Communication interface IEC 61131-9 Product standard EN 60947-5-2 Laser safety EN 60825-1:2014 Approvals and certificates UL approval E87056 , cULus Listed , class 2 power supply , type rating 1 FDA approval IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 Ambient conditions Ambient temperature -40 ... 60 °C (-40 ... 140 °F) , fixed cable
-25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains Storage temperature -40 ... 70 °C (-40 ... 158 °F) Mechanical specifications Housing width 15 mm Housing height 36.5 mm Housing depth 26.7 mm Degree of protection IP67 / IP69 / IP69K Connection 2 m fixed cable Material Housing PC (Polycarbonate) Optical face PMMA Mass approx. 38 g Cable length 2 m